Hitachi Compute Blade 2000 User Manual page 241

Properties: Controller properties submenu 2
Click Next in the Properties: Controller properties submenu 1 screen and the
following screen appears.
This setting item is not supported. Do not use this setting.
A
B
Setting item
A Stop CC On Error
B Maintain PD Fail History
C Schedule CC
Notice
Description
Sets an operation when an error is
detected at the consistency check
(CC).
Sets whether or not a failed hard
disk can be used.
Sets a consistency check schedule.
190
C
Setting/display value **
[No (continuous operation)] /
Yes (stops the consistency check.)
[Enabled (Registers failed hard
disk information.)] /
Disabled (Not register failed hard
disk information.)
When clicking [Supported], the
screen moves to "Schedule CC
Page: Schedule Consistency
Check setting submenu".