Hitachi Compute Blade 2000 User Manual page 238

Controller properties: menu for setting the disk array controller board
You can display and set the hardware information about the disk array controller
board.
Select Controller Properties from the main menu, and the following screen appears.
A
B
C
D
E
F
G
H
I
Display item
A Serial Number
B SubVendorID
C SubDeviceID
D PortCount
E HostInterface
F Firmware Version
G FW Package Version
H Firmware Time
I WebBIOS Version
J FRU
K Encryption Capable
L NVRAM Size
M Memory Size
N Min Stripe Size
O Max Stripe Size
P Virtual Disk Count
Q Physical Disk Count
You cannot change the settings for those items displayed
here.
What is displayed
Serial number
Sub-vendor ID
Sub-device ID
Number of ports installed
Host interface
Firmware version
Firmware package version
Current time at which firmware is acquired
MegaRAID WebBIOS version
Board names per maintenance
Encryption function: Enable or Disable
Size of NVRAM installed
Size of memory installed
Minimum stripe size
Maximum stripe size
Exisiting number of array configurations (logical devices)
Number of physical devices installed
187
J
K
L
M
N
O
P
Q