Hitachi Compute Blade 2000 User Manual page 288

Click Next.
2
The following screen appears:
3 Select one of the setting values in the table below from Controller BIOS, and
click Submit.
Setting value
Enabled
Disabled
Make sure to click Submit after changing the setting.
4 Confirm that Controller BIOS is set to that value.
Click Home to return to the main menu.
5
Description
Enables BIOS of the SAS internal RAID board:
GVX-CA2SRD2X1/GV-CA2SRD2X1-Y.
Enables the boot from the disk array.
Disables BIOS of the SAS internal RAID board:
GVX-CA2SRD2X1/GV-CA2SRD2X1-Y.
Disables the boot from the disk array.
237