HP XP20000/XP24000 Manual page 99

Table 23 Error Codes — Part Code 0610 (continued)
Part Error Error Message
Code Number
0610 59061 Failed to have the number of
paths the same as the number
of the specified alternate
paths.
0610 59062 Failed to assign a normal
path.
0610 59063 The number of paths
registered in the port reached
the maximum.
0610 59064 A 610 xxxxx error exists in
Preview. Delete the row
containing the 610 xxxxx
error, and then select the
Apply button.
0610 59065 No SSID can be specified.
0610 59066 Do you want to specify a CU
without restrictions on SLPRs?
0610 59107 The volume has been
mapped as a mainframe
volume by the Add Volume
operation. The settings of the
volume made at the external
subsystem side are carried
over. Restore the volume
before using it.
0610 69000 Are you sure you want to
delete the specified policy
file?
0610 69001 The specified file already
exists. Do you want to
overwrite this file?
0610 69002 No paths are selected.
0610 69003 Some of the SSIDs are not
set.
0610 69004 The specified SSID is invalid.
0610 69005 Either the emulation types or
the SLPR numbers or the both
for the multiple external
volumes you selected are not
the same. When selecting
multiple volumes, select the
volumes that have the same
emulation type and the same
SLPR number.
0610 69006 There is an external volume
that the parameter setting is
not completed. Complete the
parameter setting of all
external volumes.
Recommended Action
Specify fewer alternate paths,
and then retry the operation.
Check the status of the
connected path, and then
retry the operation.
Define a path from a new
port to the external volume,
and then retry the operation.
Check the details on the 610
xxxxx error, and then delete
the row containing the 610
xxxxx error.
Check the SSID.
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Click [OK].
To continue the processing,
click [OK]. To stop the
processing, click [Cancel].
To overwrite the file, click
[OK]. Otherwise, click
[Cancel].
Select the paths.
Set the SSID.
Set another SSID.
When selecting multiple
volumes, select the volumes
that have the same emulation
type and the same SLPR
number.
Complete the parameter
setting of all external
volumes.
Remote Web Console Error Codes
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
i 0
W 0
W 0
W 0
W 0
E 5
W 0
W 0
W 0
99