HP XP20000/XP24000 Manual page 364

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 68739
7005 68743
7005 68744
7005 68749
7005 68750
7005 68755
7005 68760
364 Remote Web Console for Storage System Messages and Error Codes
Error Message
The command has been
rejected, because the
specified reserved volume is
an XP Thin Provisioning
volume not associated with a
pool.
The command has been
rejected, because Quick
Format is performed on the
specified P-VOL.
The command has been
rejected, because Quick
Format is performed on the
specified S-VOL.
The command has been
rejected, because the
specified P-VOL is used as an
S-VOL of XP Continuous
Access Asynchronous pair.
The Quick Restore command
was rejected, because the
specified pair is composed
of the XP Thin Provisioning
volume and the volumes other
than the XP Thin Provisioning
volume.
The Quick Restore command
was rejected, because device
information (Inquiry
information) for P-VOL and
S-VOL was different in the
specified pair.
Quick Restore cannot be
executed, because the
configuration is being backed
up in the target volume. Wait
for awhile, and then retry the
operation.
Recommended Action
Associate the XP Thin
Provisioning volume with a
pool, and then retry the
operation.
Retry the operation after the
Quick Format has completed.
Retry the operation after the
Quick Format has completed.
The command cannot be
executed because the XP
Continuous Access
Asynchronous pair is not in
the PSUS state. See the
Interoperability with Other
Products and Functions
section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the state of XP Continuous
Access Asynchronous pair
and the XP Business Copy
operations.
Quick Restore cannot be
executed by the current pair
configuration.
Quick Restore cannot be
executed by the current pair
configuration. Select a pair
where the device information
(Inquiry information) is the
same, and execute Quick
Restore.
Wait for awhile, and then
retry the operation.
Severity Failure
Level Level
i 5
i 0
i 0
W 5
i 0
i 0
i 0