HP XP20000/XP24000 Manual page 234

Table 50 Error Codes — Part Code 6005 (continued)
Part Error
Code Number
6005 8843
6005 8844
6005 8845
6005 8846
6005 8847
6005 8848
6005 8849
6005 8850
6005 8851
234 Remote Web Console for Storage System Messages and Error Codes
Error Message
Suspend(Pairsplit-r) operation
failed because specified
volume or other volume in the
same group is not in
permissible status.
Suspend(Pairsplit-r) operation
failed because specified
volume or other volume in the
same group is in status
transition.
Preset Suspension is effective
in the CT Group.
An internal error occurred.
An internal error occurred.
Wait a few minutes and retry
the Suspend Pair (Pairsplit-r)
operation.
Specified volume is not part
of XP Continuous Access pair
(Not in Duplex (PAIR),
Pending (COPY), Suspend
(PSUS) state).
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
Invalid R-VOL.
Recommended Action
The operation failed, because
of one of the following
reasons:
The specified volume is
simplex.
There is no duplex or
duplex-pending volume in
the group.
Either the specified volume
or another volume in the
same group is suspended.
Verify the status, and retry the
operation.
The operation failed, because
of one of the following
reasons:
The specified volume or
another volume in the
same group is deleting.
The specified volume or
another volume in the
same group is
suspending.
Wait for the change in status
to be completed, and then
retry the operation.
Cancel the preset suspension
in the CT group, and then
retry the operation.
Call HP technical support.
Call HP technical support.
The suspend pair (Pairsplit-r)
operation failed. A few
minutes later, refresh the
window, confirm if the
specified volumes are in the
permissible status, and then
retry the operation.
The specified volume is not
part of a XP Continuous
Access pair. Check the
volume.
Check the serial number,
SSID, link address and
controller ID of the RCU, and
set the correct value. Then
retry the operation. If the
same error occurs, contact HP
technical support.
Check the R-VOL status.
Severity Failure
Level Level
i 4
i 4
i 4
E 4
E 4
i 4
i 4
E 4
E 4