HP XP20000/XP24000 Manual page 379

Table 64 Error Codes — Part Code 7105 (continued)
Part Error Error Message
Code Number
7105 8638 The command has been
rejected, because the
specified S-VOL is set for use
in Cache Residency Manager
for Mainframe.
7105 8639 The command has been
rejected, because the
specified T-VOL is set for use
in Cache Residency Manager
for Mainframe.
7105 8640 The command has been
rejected, because the pair
sharing the S-VOL was in the
Reverse Copy or Quick
Restore status.
7105 8641 The pairs contain a pair in
the Reverse Copy status.
7105 8643 The Resynchronize Volume
Pair operation has been
rejected, because the
specified pair is not in the
state of Split.
7105 8644 The command has been
rejected, because the pair
status is not Split or Suspend.
7105 8645 The Reverse Copy command
has been rejected, because
the S-VOL is shared as the
M-VOL of a XP Continuous
Access pair.
7105 8646 The Reverse Copy request
was rejected, because the
S-VOL was shared with a XP
Continuous Access pair in the
non-suspend status.
7105 8647 The Reverse Copy command
has been rejected, because
the T-VOL is shared with an
M-VOL of a XP Continuous
Access pair.
7105 8648 The boot device and the
S-VOL do not match in the
AddPair command.
Recommended Action
You cannot execute the
specified operation. Release
the Cache Residency
Manager for Mainframe
setting for the operation.
You cannot execute the
specified operation. Release
the Cache Residency
Manager for Mainframe
setting for the operation.
Wait until Reverse Copy or
Quick Restore completes.
You cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The Resynchronize Volume
Pair operation cannot be
executed in the current pair
status. See the Adding Pairs
and Resynchronize Pair
Operations sections in the
Hitachi ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of pairs and the
ShadowImage for Mainframe
operations.
Check the pair status.
You cannot execute the
specified operation. Release
the XP Continuous Access
pair for the operation.
Delete the XP Continuous
Access pair.
Delete the XP Continuous
Access pair.
Check the specified volume
number.
Remote Web Console Error Codes 379
Severity Failure
Level Level
i 0
i 0
i 0
i 0
W 5
i 0
i 0
i 0
i 0
i 0