HP XP20000/XP24000 Manual page 350

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 8549
7005 8550
7005 8551
7005 8552
7005 8553
7005 8554
7005 8555
7005 8556
7005 8557
7005 8558
7005 8559
7005 8560
7005 8561
350 Remote Web Console for Storage System Messages and Error Codes
Error Message
The P-VOL is not
implemented.
The command has been
rejected, because the
specified P-VOL is blocked or
used as a system disk.
The P-VOL is being formatted.
This volume cannot be
specified as a P-VOL because
it is used as a command
device.
The S-VOL is not
implemented.
The command has been
rejected, because the
specified S-VOL is blocked or
used as a system disk.
The S-VOL is being formatted.
This volume cannot be
specified as an S-VOL
because it is used as a
command device.
The volume is not
implemented.
The command has been
rejected, because the
specified volume is blocked
or used as a system disk.
The volume is being
formatted.
This volume cannot be
specified because it is used
as a command device.
The command code is
invalid.
Recommended Action
You cannot execute the
operation for the volume
which is not implemented.
Restore the blocked
volume, and then retry the
operation.
The system disk cannot be
specified as a P-VOL.
Specify another volume.
Wait until the volume is
formatted, and retry the
operation.
Check the target volume.
You cannot execute the
operation for the volume
which is not implemented.
Restore the blocked
volume, and then retry the
operation.
The system disk cannot be
specified as an S-VOL.
Specify another volume.
Wait until the volume is
formatted, and retry the
operation.
Specify a volume that is not
used as a command device
as an S-VOL.
You cannot execute the
operation for the volume
which is not implemented.
Restore the blocked
volume, and then retry the
operation.
The system disk cannot be
specified as a reserved
volume. Specify another
volume.
Wait until the volume is
formatted, and retry the
operation.
Specify a volume that is not
used as a command device.
Call HP technical support.
Severity Failure
Level Level
i 0
E 5
i 0
i 0
i 0
W 5
i 0
i 0
i 0
E 5
i 0
i 0
E 0