HP XP20000/XP24000 Manual page 314

Table 54 Error Codes — Part Code 6505 (continued)
Part Error
Code Number
6505 6881 1
6505 68812
6505 68813
6505 68815
6505 68842
6505 68843
6505 68848
6505 68849
314 Remote Web Console for Storage System Messages and Error Codes
Error Message
The specified volume cannot
be used as a journal volume
because it is used by
FICON(R) Data Migration.
A pair could not be created
because the specified
secondary data volume was
an XP Thin Provisioning
volume whose capacity was
being changed.
A pair could not be created
because the specified
primary data volume was an
XP Thin Provisioning volume
whose capacity was being
changed.
The pair cannot be released
because the specified volume
is used as the pair volume of
XP Continuous Access or XP
External Storage Access
Manager.
The operation failed, because
the specified secondary data
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
The operation failed, because
the specified primary data
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
The operation failed, because
the specified primary data
volume was being initialized
by Business Copy or
ShadowImage for
Mainframe.
The operation failed, because
the specified secondary data
volume was being initialized
by Business Copy or
ShadowImage for
Mainframe.
Recommended Action
Specify a volume that is not
used by FICON(R) Data
Migration.
Check each capacity of the
primary data volume and the
secondary data volume after
the capacity change of
secondary data volume ends.
Plan a combination of
volumes for pair creating.
Check each capacity of the
primary data volume and the
secondary data volume after
the capacity change of
primary data volume ends.
Plan a combination of
volumes for pair creating.
The specified volume runs on
the 2DC configuration in
which XP Continuous Access
or XP External Storage
Access Manager cooperates.
Release the pair of XP
Continuous Access or XP
External Storage Access
Manager, and then retry the
operation.
Retry the operation after the
completion of discarding
zero data on the specified
volume.
Retry the operation after the
completion of discarding
zero data on the specified
volume.
Wait until the initializing
process is completed, and
then retry the operation.
Wait until the initializing
process is completed, and
then retry the operation.
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0