HP XP20000/XP24000 Manual page 321

Table 56 Error Codes — Part Code 6510
Part Error Error Message
Code Number
6510 5030 The displayed information
has not been changed.
6510 5137 The Operation value is
invalid. Specify the correct
value.
6510 5138 The value specified for
Gathering Interval is invalid.
Specify a valid value within
the range of 1 to 15.
6510 5140 The specified CU number is
incorrect. Specify the correct
CU number.
6510 5141 The specified LDEV number
is incorrect. Specify the
correct LDEV number.
6510 5142 The specified GID is
incorrect. Specify the correct
GID.
6510 5143 The specified LUN is
incorrect. Specify the correct
LUN.
6510 5144 Some of the entered values
are incorrect. Check the
values and then specify
correct values.
6510 7301 An error occurred in client
logic.
6510 7302 An error occurred in client
logic.
6510 7303 An error occurred in client
logic.
6510 7440 An error occurred during
processing. If this problem
persists, call HP technical
support.
6510 8101 The system cannot apply the
new configuration. Do you
want to refresh?
6510 9006 Exchange the channel cable
connections after
confirmation of the port type.
6510 9009 The export is complete.
6510 9021 The Port Setting process has
not completed. Do you want
to continue for other ports?
Recommended Action
Specify the data that you
want to register in the SVP
and retry the operation.
Check the contents, and retry.
Check the contents, and retry.
Specify the correct CU
number.
Specify the correct device
number.
Specify the correct group
number.
Specify the correct LUN.
Check the values, and then
specify correct values.
Call HP technical support.
Call HP technical support.
Call HP technical support.
If the error occurs after
retrying, call HP technical
support.
Click [Refresh], and retry.
Check the port type, and then
change cable connections.
Click [OK].
To continue processing, click
[Yes]. If the processing
finishes, reconfigure the port
that is not in operation.
Remote Web Console Error Codes 321
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
E 2
E 2
E 2
E 2
W 5
W 5
i 0
W 5