HP XP20000/XP24000 Manual page 384

Table 64 Error Codes — Part Code 7105 (continued)
Part Error
Code Number
7105 58351
7105 58356
7105 58451
7105 58518
7105 58519
7105 58520
7105 58533
7105 58534
7105 58535
7105 58536
7105 58572
7105 58573
384 Remote Web Console for Storage System Messages and Error Codes
Error Message
The Quick Restore command
has been rejected, because
the specified pair is
composed of internal and
external volumes, and also
used as a Universal
Replicator for Mainframe
pair.
The command was rejected,
because the specified volume
was used by Universal
Replicator for Mainframe and
TrueCopy for Mainframe.
The storage system is in
internal process. Retry the
operation.
The operation failed, because
the XP Snapshot pair(s)
existed.
The operation failed, because
the XP Snapshot pair(s)
existed.
The operation failed, because
different versions of
microcodes coexisted in the
storage system.
The operation failed, because
the specified S-VOL was a
journal volume.
The operation failed, because
the specified T-VOL was a
journal volume.
The reserve volume setting
failed because the specified
volume was a journal volume.
The operation failed because
the specified T-VOL was a
data volume of Universal
Replicator for Mainframe.
Check the requirements for
using the volume with
Universal Replicator for
Mainframe.
An error occurred on the DKC
side. If this problem persists,
call HP technical support.
This function is not supported.
Recommended Action
Stop using the specified pair
for Universal Replicator for
Mainframe, or specify a
different pair, and then retry
the operation.
To continue the operation,
release the Universal
Replicator for Mainframe pair
or the TrueCopy for
Mainframe pair, and retry the
operation.
If the problem persists despite
retrying, call HP technical
support.
To continue the operation,
delete all XP Snapshot pairs
and retry.
To continue the operation,
delete all XP Snapshot pairs
and retry.
Replace the microcode, and
then retry the operation.
Release the journal volume
setting or specify another
volume.
Release the journal volume
setting or specify another
volume.
Release the journal volume
setting or specify another
volume.
Check the requirements for
using the volume with
Universal Replicator for
Mainframe.
An error occurred on the
DKC side. If the same
problem persists despite
retrying, call HP technical
support.
Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
Severity Failure
Level Level
i 0
i 0
W 0
i 0
i 0
E 2
W 2
W 2
W 2
W 5
E 3
E 3