HP XP20000/XP24000 Manual page 206

Table 45 Error Codes — Part Code 5205 (continued)
Part Error
Code Number
5205 57101
5205 57102
5205 58451
5205 58572
5205 58573
5205 58574
5205 58575
5205 58576
5205 65434
5205 65673
5205 65674
5205 65697
5205 65698
206 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The storage system is in
internal process. Retry the
operation.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
This function is not supported.
An error occurred while
connecting to the disk array.
Wait for a while, and then
retry the operation.
An error occurred while
connecting to the disk array.
Wait for a while, and then
retry the operation.
A communication time-out
error occurred in the disk
subsystem. Wait for a while,
and then retry the operation.
The specified volume(s) are
the leaf volume(s) of Business
Copy.
The specified volume(s) are
already being used as of XP
Thin Provisioning volume
(TP-VOL) (s).
The specified volume(s) are
already being used as of XP
Thin Provisioning volume
(TP-VOL) (s).
The volume specified as a
migration source cannot be
used, because it is in quick
formatting.
The volume specified as a
migration source cannot be
used, because it is in quick
formatting.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If the problem persists despite
retrying, call HP technical
support.
If the problem persists despite
retrying, call HP technical
support
Check if the DKCMAIN
microcode and SVP
microcode versions are
mismatched.
If the problem persists despite
retrying, call HP technical
support
If the problem persists despite
retrying, call HP technical
support
If the problem persists despite
retrying, call HP technical
support
Specify another volume.
Check the setting of the
specified volume.
Check the setting of the
specified volume.
Retry the operation after the
quick format is completed.
Retry the operation after the
quick format is completed.
Severity Failure
Level Level
E 2
E 2
W 6
E 3
E 3
E 6
E 6
E 3
E 6
E 6
E 6
E 6
E 6