HP XP20000/XP24000 Manual page 185

Table 41 Error Codes — Part Code 4010 (continued)
Part Error Error Message
Code Number
4010 5030 No deletion area is specified.
Retry the operation to specify
the deletion area.
4010 5058 The Cache Residency settings
that exceed the maximum
size or maximum available
area are invalid.
4010 7060 An error occurred in the client
logic.
4010 7440 An error occurred during
processing. If this problem
persists call HP technical
support.
4010 9000 Prestaging has completed.
4010 9010 The system will set the
contents.
4010 9060 Do you want to delete?
4010 9340 Are you sure you want to
reset the P.P. information?
4010 59035 Prestaging will be carried out
to the selected LDEV. Do you
want to continue?
4010 65643 The number of Extents in the
LDEV has exceeded the
maximum.
Table 42 Error Codes — Part Code 4105
Part Error Error Message
Code Number
4105 1603 This functionality is not
available. Cache Residency
Manager is required.
4105 6012 An error occurred during
server processing. If this
problem persists, call HP
technical support.
4105 6023 An error occurred during
server processing. If this
problem persists, please call
HP technical support.
4105 6510 The disk subsystem is busy.
Please wait for a while, and
then retry the operation.
Recommended Action
Correct the specified content,
and retry.
Correct the Cache Residency
settings, and then retry the
operation.
Call HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
The normal end was carried
out. Click [OK] and close the
dialog.
The information for the
program product will be reset
if you click [OK]. The
information will not be reset
if you click [Cancel].
To perform the prestaging
operation, click [Yes]. To not
perform the prestaging
operation, click [No].
Reduce the number of Extents
in the LDEV.
Recommended Action
Install the necessary program
product.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
If the same problem persists
despite retrying, call HP
technical support.
Wait a few seconds, and
then retry the operation.
Remote Web Console Error Codes 185
Severity Failure
Level Level
W 5
W 5
E 2
E 2
i 0
i 0
i 0
W 5
i 0
E 4
Severity Failure
Level Level
E 6
E 3
W 3
W 5