HP XP20000/XP24000 Manual page 95

Table 22 Error Codes — Part Code 0605 (continued)
Part Error Error Message
Code Number
0605 68741 The Disconnect Subsystem
command or the Disconnect
Volume command cannot be
executed for an external
volume that includes pool
volumes registered in the Pool
that has the association with
a normal XP Thin Provisioning
volume. Change the status of
the associated XP Thin
Provisioning volume to
Blockade, and then retry the
operation.
0605 68742 Set the same cache mode to
all volumes that make up the
Pool volume. Release the bind
mode setting if there is a
volume whose cache mode
cannot be changed because
the bind mode is set.
0605 68800 Auto LUN or Quick Restore
is in progress.
0605 68801 The volume targeted for
maintenance includes the
System Disk being used in
Quick Format.
0605 68802 The volume targeted for
maintenance includes the
System Disk being used in
Audit Log.
0605 68866 The volume targeted for
maintenance includes a
system disk being used by the
Additional configuration Back
up.
Recommended Action
The Disconnect Subsystem
command or the Disconnect
Volume command cannot be
executed for an external
volume that includes pool
volumes registered in the Pool
that has the association with
a normal XP Thin Provisioning
volume. Change the status of
the associated XP Thin
Provisioning volume to
Blockade, and then retry the
operation.
Set the same cache mode to
all volumes that make up the
Pool volume. Release the bind
mode setting if there is a
volume whose cache mode
cannot be changed because
the bind mode is set.
Wait for XP Auto LUN or
Quick Restore to be
completed, and then retry the
operation.
The volume targeted for
maintenance includes the
System Disk being used in
Quick Format.
Wait for the Quick Format to
be completed, and then retry
the operation.
The volume targeted for
maintenance includes a
System Disk being used by
the Audit Log. To execute the
operation, set the Audit Log
Buffer to Disable, which is
located in the system disk
option window of VLL.
The volume targeted for
maintenance includes a
system disk being used by the
Additional configuration Back
up.
When you want to execute
the operation, set the
Additional configuration Back
up to Disable, which is
located in the system disk
option window of VLL.
Remote Web Console Error Codes
Severity Failure
Level Level
E 5
E 5
E 5
E 5
E 5
E 5
95