HP XP20000/XP24000 Manual page 258

Table 52 Error Codes — Part Code 6010 (continued)
Part Error
Code Number
6010 91 13
6010 91 14
6010 91 15
6010 91 16
6010 91 17
6010 91 18
6010 91 19
6010 9120
6010 9121
6010 9122
6010 9124
6010 9125
6010 9126
6010 9127
6010 9128
258 Remote Web Console for Storage System Messages and Error Codes
Error Message
Are you sure you want to
clear SIMs of XP Continuous
Access?
The value has been changed.
Do you want to continue the
operation?
The monitoring was stopped
by another operator. The
graph will be closed.
Another operator has
changed the Gathering
Interval value. The graph will
be closed.
Are you sure you want to
close the graph?
Check the specified value.
No graph item has been
selected. Select a graph item.
The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
Are you sure you want to
export pair status?
This process may take up to
%d minutes. Do you want to
continue?
Are you sure you want to
cancel the export?
The script is running now.
Are you sure you want to
terminate the script?
Are you sure you want to
close all active graphs?
The specified volume was not
found.
Recommended Action
To clear the XP Continuous
Access related SIM, click
[OK]. Otherwise, click
[Cancel].
To continue the process, click
[OK]. Otherwise, click
[Cancel].
Click [OK].
Click [OK].
To close the graph, click
[OK]. Otherwise, click
[Cancel].
To apply this setting, click
[OK]. To change the setting,
click [Cancel].
Select a graph item.
To execute the processing
and close the graph, click
[OK], Otherwise, click
[Cancel].
To execute this operation,
click [OK], Otherwise, click
[Cancel].
To output pair status into a
snapshot file, click [OK]. To
cancel this operation, click
[Cancel].
To continue the operation,
click [OK]. To cancel the
operation, click [Cancel].
To stop the operation, click
[OK]. To continue the
operation, click [Cancel].
To terminate the script, click
[OK]. Otherwise, click
[Cancel].
To close the graphs, click
[OK]. Otherwise, click
[Cancel].
Click [OK], and then specify
the correct volume.
Severity Failure
Level Level
W 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0
W 0
W 0
i 0
i 0