HP XP20000/XP24000 Manual page 218

Table 49 Error Codes — Part Code 5310 (continued)
Part Error
Code Number
5310 9329
5310 9330
5310 9331
5310 9333
5310 9334
5310 9335
5310 59000
5310 65733
Table 50 Error Codes — Part Code 6005
Part Error
Code Number
6005 5013
6005 5099
6005 5145
6005 6000
218 Remote Web Console for Storage System Messages and Error Codes
Error Message
To continue initialization,
select OK on the next
window. To quit the
operation, select Cancel on
the next window.
To continue initialization,
select OK on the next
window. To quit the
operation, select Cancel on
the next window.
The specified WWN is
already in use.
Do you want to change the
control status to Port Control?
Do you want to change the
control status to WWN
Control?
Do you want to change the
control status to No Control?
The Performance Control
group extends across multiple
SLPRs. Do you want to
continue?
WWN cannot be registered
because the number of
monitored WWNs of each
port has reached the
maximum for the ports being
set as monitoring target at the
same time.
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This function does not support
the specified port.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
If you click [OK] on the next
window, the settings on port
control will be initialized. To
quit the operation, click
[Cancel] on the next window.
If you click [OK] on the next
window, the settings on
WWN control will be
initialized. To quit the
operation, click [Cancel] on
the next window.
Correct the specified
contents, and request the
setting of the configuration
information again.
Click [Yes] to change the
control status.
Click [Yes] to change the
control status.
Click [Yes] to change the
control status.
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Reduce the number of
monitored WWNs in the
ports being set as monitoring
target at the same time, and
then retry the operation.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Refresh the window.
If this problem persists, call
HP technical support.
Severity Failure
Level Level
W 5
W 5
W 5
I 5
I 5
i 5
i 0
i 5
Severity Failure
Level Level
E 2
E 2
i 4
E 2