HP XP20000/XP24000 Manual page 187

Table 43 Error Codes — Part Code 5105
Part Error Error Message
Code Number
5105 2002 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 2003 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 2007 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 2015 A connection error has
occurred.
5105 2033 The SVP is now updating the
statistics data. Wait for a
while, and then select the
[Refresh] button.
5105 2145 A connection error has
occurred.
5105 5010 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 5013 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 5099 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 5202 This functionality is not
available because
Performance Monitor is not
installed.
5105 5400 Since the SVP is busy, the
monitoring data cannot be
obtained.
Recommended Action
If this problem persists, call
HP technical support.
Use the SVP to check if the
DKC is in the normal status,
and then retry. If the same
problem persists despite
retrying, call HP technical
support.
If this problem persists, call
HP technical support.
Retry the same operation. If
the error occurs after retrying,
call HP technical support.
The SVP is now gathering the
latest data. Internal
processing in progress. Wait
a few seconds, and then click
[Refresh].
Retry the same operation. If
the error occurs after retrying,
call HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Install the required program
product.
Wait a few seconds, and
then retry.
Do either of the following if
two users are displaying the
Performance Monitor window
or running the Export Tool:
Ask one of the users to
display another window.
Ask one of the users to log
off.
Wait for one of the users
to quit the Export Tool.
Remote Web Console Error Codes 187
Severity Failure
Level Level
E 2
E 2
E 2
E 6
W 4
E 6
E 2
E 2
E 2
W 6
W 3