HP XP20000/XP24000 Manual page 78

Table 19 Error Codes — Part Code 0505 (continued)
Part Error
Code Number
0505 8401
0505 56524
0505 57004
Table 20 Error Codes — Part Code 0507
Part Error
Code Number
0507 5099
0507 6012
0507 7070
Table 21 Error Codes — Part Code 0510
Part Error
Code Number
0510 7060
0510 59045
0510 59073
78 Remote Web Console for Storage System Messages and Error Codes
Error Message
The status of the storage
system requires maintenance
(for example, the subsystem
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
Call HP technical support.
This function cannot be used
by the storage partition
administrator.
The CLPR configuration of the
subsystem may contain some
inconsistent information.
Change the CLPR
configuration.
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Error Message
An error occurred in the client
logic.
The detailed information will
be initialized by this
operation. Do you want to
continue?
Since an error has occurred
in the operation to extend
cache capacity, the CLPR
configuration of the
subsystem may contain some
inconsistent information. For
recovery, extend cache
capacity again.
Recommended Action
Check the status of the disk
storage system (for example,
the storage system is blocked,
the shared memory is
inconsistent, or some other
problem occurs). If this
problem persists, call HP
technical support.
Select another window. To
set this function, contact the
storage administrator.
Change the CLPR
configuration from the
Partition Definition window.
Recommended Action
If this problem persists, call
HP technical support.
If the same problem persists
despite retrying, call HP
technical support.
If the same problem persists
despite retrying, call HP
technical support.
Recommended Action
If this problem persists, call
HP technical support.
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Click [OK], and extend cache
capacity again.
Severity Failure
Level Level
W 6
E 3
E 3
Severity Failure
Level Level
E 2
E 2
E 2
Severity Failure
Level Level
E 2
W 0
i 0