Page 1: Error Codes
HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes Abstract This document lists the error codes and error messages for HP StorageWorks Remote Web Console for HP StorageWorks XP disk arrays, and provides recommended action for the error conditions. HP Part Number: AE131-96086 Published: May 201 1 Edition: Fourteenth...
Page 2 © Copyright 2007, 201 1 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.21 1 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Page 3: Table Of Contents
Contents 1 Remote Web Console for Storage System Messages and Error Codes....4 Remote Web Console for Storage System Messages..............4 Message Window Format......................4 Remote Web Console Error Codes....................5 2 Support and Other Resources..............444 Related Documentation......................444 Conventions for Storage Capacity Values.................444 HP Technical Support......................444 Subscription Service......................444 HP Websites........................445 Documentation Feedback.......................445...
Page 4: Remote Web Console For Storage System Messages And Error Codes
1 Remote Web Console for Storage System Messages and Error Codes “Remote Web Console for Storage System Messages” (page 4) “Message Window Format” (page 4) “Remote Web Console Error Codes” (page 5) Unless otherwise specified, the term storage system in this guide refers to the following disk arrays: HP StorageWorks XP24000 Disk Array HP StorageWorks XP20000 Disk Array The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer...
Page 5: Remote Web Console Error Codes
Fatal error The server is unable to accept the request from Remote Web Console. One possible cause is that some process is in progress at the server. This message does not indicate an error. Message text: Descriptive text that appears in the message window. It may include variables %s (character string) and %d (numeral).
Page 6 Failure Levels. The failure levels for the error codes are: 0: No Error 1: Select MSG OK to end forcibly 2: All Refresh or Exit is valid only 3: All Refresh, Refresh, or Exit is valid and the buttons, other than the buttons of the functions in which the error occurred, are valid.
Page 7 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 2005 An error occurred during SVP If this problem persists call HP processing. If this problem technical support. persists, call HP technical support.
Page 8 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 401 1 A network error occurred. Log on again. The probable cause is: A network error may occur A timeout error occurred when the load of another during communication...
Page 9 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 5400 Since the SVP is busy, the Wait a few seconds, and monitoring data cannot be then retry. obtained.
Page 10 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 5522 An error occurred during SVP If the same problem persists processing. If this problem despite retrying, call HP persists, call HP technical technical support.
Page 11 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 5637 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 12 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 6540 No more users can be Delete unnecessary user registered, because the accounts. number of registered users has reached the maximum. Reduce the number of users, and then retry the operation.
Page 13 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 56529 The available SLPR does not Contact the storage exist. Contact the storage administrator and have the administrator and have the SLPR set.
Page 14 Table 1 Error Codes — Part Code 0001 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0001 65734 P9000 or XP Command View P9000 or XP Command View Advanced Edition version Advanced Edition version information ID is invalid. information ID is invalid.
Page 15 Table 2 Error Codes — Part Code 0002 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0002 2005 An error occurred during SVP If this problem persists call HP processing. If this problem technical support. persists, call HP technical support.
Page 16 Table 2 Error Codes — Part Code 0002 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0002 5010 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 17 Table 2 Error Codes — Part Code 0002 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0002 6050 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 18 Table 2 Error Codes — Part Code 0002 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0002 56525 Because the settings across To continue the operation, the multiple SLPRs are contact the storage contained, the authority has administrator and have the been shifted to the storage settings across the multiple...
Page 19 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 101 1 An error occurred. If this The volume that links as an problem persists, call HP expanded LU extends over technical support.
Page 20 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1021 An error occurred. If this The specified volume does problem persists, call HP not exist. (You have specified technical support.
Page 21 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1030 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 22 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1041 The CU number and the LDEV Check and correct the number set in the VLL settings. If Volume Initialize operation are the same as and Make Volume are those of other volumes.
Page 23 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1063 The specified WWN is Correct the specified already in use. Specify contents, and request the another WWN. setting of the configuration information again.
Page 24 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1 104 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 25 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1 124 The command device setting The setting method of and the command device command device/command security setting are incorrect. device security is incorrect.
Page 26 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1 130 You cannot specify the Correct the specified default nickname when contents, and request again. setting the nickname of a host group or a host.
Page 27 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1 138 An error occurred. If this An error occurred. If this problem persists, call HP problem persists, call HP technical support.
Page 28 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1 182 An error occurred. If this If this problem persists call HP problem persists, call HP technical support. technical support.
Page 29 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1357 S-VOLs remain on the The specified Port is for Fibre Fibre-RCU port. This XP Continuous Access. Delete operation may cause a fatal a logical path, and then retry damage to the S-VOLs.
Page 30 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1604 The specified function is not Install the required program available because it requires product. Cache Residency for Mainframe.
Page 31 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 1916 You cannot set the volumes Correct the settings, and then in the same parity group retry the operation. across multiple CU groups.
Page 32 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2010 The LDEV is being used by Check if the host is the host, or an error occurred performing I/O operations during SVP processing.
Page 33 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2045 The current Cache Residency Wait a few seconds, and setting cannot be changed then retry the operation. because the prestaging operation is in progress.
Page 34 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2087 The system is online to the Take the storage system mainframe host. Take the offline from the host. subsystem offline from the host.
Page 35 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2095 A maintenance operation is Wait for a moment and retry. in progress. For example: LDEV formatting is in progress Correction Copy is in progress...
Page 36 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2200 The Concurrent Copy or If the Concurrent Copy or the Compatible XRC operation is Compatible XRC operation is in progress in the target in progress in the target volumes.
Page 37 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 2515 One of the following is Release the pair definition or defined: an XP Continuous delete command devices Access pair, an XP defined by Business Continuous Access Journal...
Page 38 Table 3 Error Codes — Part Code 0003 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0003 3003 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 39 Table 4 Error Codes — Part Code 0004 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0004 6012 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 40 Table 6 Error Codes — Part Code 0006 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0006 1005 An error occurred. If this Call HP technical support. problem persists, call HP technical support. 0006 1006 An error occurred. If this Call HP technical support.
Page 41 Table 7 Error Codes — Part Code 0007 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0007 5306 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 42 Table 7 Error Codes — Part Code 0007 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0007 6091 An error occurred while Call HP technical support. compressing a file. 0007 6092 An error occurred while If this problem persists, call reading a file.
Page 43 Table 8 Error Codes — Part Code 0010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0010 6027 A network error occurred. You cannot connect to the The probable causes are: SVP because of factors, such as a network error or SVP The SVP was not ready.
Page 44 Table 8 Error Codes — Part Code 0010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0010 8101 The system cannot apply the Click [Refresh], and retry the new configuration. Do you operation. want to refresh? 0010 9376 The capacity for storing the...
Page 45 Table 8 Error Codes — Part Code 0010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0010 59109 The free space to store the Download the audit log file. audit log file has run out. The old audit log information is deleted because it is overwritten with the new...
Page 46 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 2086 The configuration of XP Reset the configuration Continuous Access, Business definition of XP Continuous Copy, ShadowImage for Access, XP Business Copy, Mainframe, Auto LUN, ShadowImage for...
Page 47 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 2095 A maintenance operation is Wait a few seconds and in progress. For example: retry. LDEV formatting is in progress Correction Copy is in progress...
Page 48 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 251 1 The restore operation has Shred or format the specified failed, because the specified LDEV. If the specified LDEV is LDEV was not shredded or an XP Thin Provisioning formatted.
Page 49 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 2519 A Business Copy or Cancel the reserve volume, ShadowImage for Mainframe and then retry the operation. reserve volume is defined. Cancel the reserve volume, and then retry the operation.
Page 50 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 6535 You cannot make changes Delete a logical path, and because a logical path to the then make configuration volume still remains.
Page 51 Table 9 Error Codes — Part Code 0105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0105 58626 An XP Snapshot pair is Cancel the pair definition, defined. Cancel the pair and then retry the operation. definition, and then retry the operation.
Page 52 Table 10 Error Codes — Part Code 01 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 01 10 5510 The array is refreshing, or The array is refreshing, or another user is changing the some other user is changing array's configuration.
Page 53 Table 10 Error Codes — Part Code 01 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 01 10 9105 The value that is under setup To close the window, click is not reflected yet. Do you [OK].
Page 54 Table 10 Error Codes — Part Code 01 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 01 10 59002 The storage system is in Wait for a while, and then internal process, or some click [OK] and change the other user is changing the mode to Modify.
Page 55 Table 1 1 Error Codes — Part Code 0190 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0190 5007 Enter the location name. Input the location name and retry. 0190 5008 You cannot use the following Remove the invalid characters characters: "...
Page 56 Table 1 1 Error Codes — Part Code 0190 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0190 5200 Security-file for download Call HP technical support. does not exist. 0190 5210 The number of storage You cannot register anymore.
Page 57 Table 1 1 Error Codes — Part Code 0190 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0190 9001 Are you sure you want to None. delete the selected storage device entry? 0190 9100 Are you sure you want to Reply to this message.
Page 58 Table 12 Error Codes — Part Code 0210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0210 55618 Authority of all administrator Check the settings. roles cannot be set to Disable. 0210 55619 Authority of the account To eliminate the authority of administrator role will be lost.
Page 59 Table 12 Error Codes — Part Code 0210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0210 65637 Are you sure you want to To disable the specified user, disable the specified user? click [OK]. Otherwise, click [Cancel].
Page 60 Table 13 Error Codes — Part Code 0290 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0290 5103 Select [NO] for the Polling Check the settings. period for checking obstacles Option. 0290 5104 Status Window Hidden Check the settings.
Page 61 Table 13 Error Codes — Part Code 0290 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0290 6170 Failed to open the user If the same error occurs again account list file. despite retrying, call HP technical support.
Page 62 Table 13 Error Codes — Part Code 0290 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0290 9001 Are you sure you want to None. delete the selected user entry? 0290 9002 Are you sure you want to None.
Page 63 Table 13 Error Codes — Part Code 0290 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0290 56343 The size of the user account Check the size of the file, list file is too large. decrease the size, and retry the operation.
Page 64 Table 14 Error Codes — Part Code 0305 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0305 6001 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 65 Table 14 Error Codes — Part Code 0305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0305 7209 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 66 Table 15 Error Codes — Part Code 0310 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0310 65685 0 cannot be specified in all Correct the settings, and then the fields. retry the operation. 0310 65686 The OS being used does not Correct the settings, and then...
Page 67 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 5073 To install/uninstall this Install or remove the related program product, you must program product first. install/uninstall another program product first.
Page 68 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 5077 To uninstall this program To uninstall this program product, you must uninstall product, you should uninstall another program product another program product first.
Page 69 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level ----------------------------------------------------- TrueCopy TrueCopy for Asynchronous Mainframe Mainframe Universal TrueCopy for Replicator for Mainframe Mainframe Continuous Continuous Access Access Asynchronous Continuous Continuous Access...
Page 70 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 5503 You have attempted to install To install an emergency key an Emergency key to the forcibly using the license key option for which a Permanent code, click [OK].
Page 71 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 7064 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 72 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 8003 The subsystem status is Isolate the abnormal section invalid. Call HP technical following the procedure support. below: Rebooting the computer.
Page 73 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 56509 The permanent key cannot be Obtain the block license used after the license is again. changed to the block license. 0405 56524 This function cannot be used...
Page 74 Table 16 Error Codes — Part Code 0405 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0405 65091 The licensed capacity is Add the licensed capacity. insufficient. The program product is installed but it will be invalid unless you add the licensed capacity during the valid period.
Page 75 Table 18 Error Codes — Part Code 0410 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0410 55002 A file name is invalid due to Check the file name and retry one of the following reasons: the operation.
Page 76 Table 18 Error Codes — Part Code 0410 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0410 59307 Do you want to discard the Click [OK] to restore the change and restore the setting. setting? 0410 59317 The setting of the program...
Page 77 Table 19 Error Codes — Part Code 0505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0505 6502 A time-out error occurred. Wait a few seconds, and Wait for a while, and then retry the operation. retry the operation.
Page 78 Table 19 Error Codes — Part Code 0505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0505 8401 The status of the storage Check the status of the disk system requires maintenance storage system (for example, (for example, the subsystem the storage system is blocked, is blocked, the shared...
Page 79 Table 22 Error Codes — Part Code 0605 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 201 1 The status of the storage Check the status of the disk system requires the storage system (if the storage maintenance (for example, system is blocked, the subsystem is blocked, the...
Page 80 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 2200 The Concurrent Copy or the If the Concurrent Copy or the Compatible XRC operation is Compatible XRC operation is in progress in the target in progress in the target volumes.
Page 81 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 2516 One of the following is Cancel or suspend the pair defined: a XP Continuous definition, and then retry the Access pair, a XP Continuous operation.
Page 82 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 5099 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 83 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 8000 An error occurred during SVP Retry the operation. If this processing. If this problem problem persists, call HP persists, call HP technical technical support.
Page 84 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 8955 An error occurred on the An error occurred on the DKC side. If this problem DKC side. If this problem persists, call HP technical persists, call HP technical support.
Page 85 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 8967 An error occurred on the An error occurred on the DKC side. If this problem DKC side. If this problem persists, call HP technical persists, call HP technical support.
Page 86 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 56507 The licensed capacity for a The licensed capacity for a program product will become program product will become insufficient because of a insufficient because of a configuration change.
Page 87 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 56519 The reserved volume setting Release the reserved volume of Business Copy, setting of XP Business Copy, ShadowImage for Mainframe ShadowImage for Mainframe or Compatible FlashCopy(R) or FlashCopy Mirroring, and...
Page 88 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 58332 The external volume is Ensure that the external blocked. volume is not blocked, and then retry the operation. 0605 58406 The Delete Volume operation...
Page 89 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 58623 The specified operation Resynchronize or release the cannot be performed, pair definition of the XP because the XP Snapshot pair Snapshot pair using the pool using the pool volumes to be volume to be maintained,...
Page 90 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 65801 There are no setting lines of Check the contents of the the ExG. spreadsheet. 0605 65802 There are no setting lines of Check the contents of the TargetPathGroup.
Page 91 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 66508 The size of the defined Check the contents of the volume is invalid. spreadsheet. 0605 66509 The total of the volume size Check the contents of the defined in the external spreadsheet.
Page 92 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 66696 The number of digits of Check the contents of the PathMode is invalid. spreadsheet. 0605 66697 The value entered as Check the contents of the PathMode is outside the spreadsheet.
Page 93 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 66716 The number of digits of CLPR Check the contents of the is invalid. spreadsheet. 0605 66717 The format of CLPR is invalid. Check the contents of the spreadsheet.
Page 94 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 66746 The format of SSID is invalid. Check the contents of the spreadsheet. 0605 66747 The value entered as SSID is Check the contents of the outside the setting range.
Page 95 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 68741 The Disconnect Subsystem The Disconnect Subsystem command or the Disconnect command or the Disconnect Volume command cannot be Volume command cannot be executed for an external executed for an external...
Page 96 Table 22 Error Codes — Part Code 0605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0605 68871 The specified volumes include Release the allocation of remote command devices mirrors in the journal group being used with mirrors in the for the remote command journal group of XP device.
Page 97 Table 23 Error Codes — Part Code 0610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0610 9060 Are you sure you want to To continue processing, click delete the selected row? [OK]. To stop processing, click [Cancel].
Page 98 Table 23 Error Codes — Part Code 0610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0610 59034 The processing of this To continue processing, click command takes some time to [OK]. To stop processing, complete.
Page 99 Table 23 Error Codes — Part Code 0610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0610 59061 Failed to have the number of Specify fewer alternate paths, paths the same as the number and then retry the operation. of the specified alternate paths.
Page 100 Table 23 Error Codes — Part Code 0610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0610 69008 An emulation type cannot be Set the emulation type that applied is specified. can be applied in the Set External Volume Parameter dialog box or Edit Policy dialog box.
Page 101 Table 23 Error Codes — Part Code 0610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 0610 69027 A CLPR number cannot be Specify the CLPR number that applied for [Set External can be applied for [Set Volume Parameter] dialog External Volume Parameter] box or [Edit Policy] dialog...
Page 102 Table 26 Error Codes — Part Code 1005 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1002 The specified volume cannot Select another volume. be set as a command device or a component of a LUSE volume, because it is being used as the volume of XP Continuous Access, Business...
Page 103 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 101 1 An error occurred. If this The volume that links as an problem persists, call HP expanded LU extend over technical support.
Page 104 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1021 An error occurred. If this The specified volume does not problem persists, call HP exist. (You have specified technical support.
Page 105 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1050 The following volumes cannot The configuration information be specified when you has been already changed. change expanded LU Check the settings, and configurations: request the setting of the...
Page 106 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1 108 The following volumes cannot Check the setting, and then be specified when you retry the operation. change the command device configurations: Volumes reserved by Auto...
Page 107 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1 127 An error occurred. If this CHA high-speed mode is problem persists, call HP specified to unmounted CHA. technical support.
Page 108 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1 135 An error occurred. If this When PORT information problem persists, call HP (Fibre Address/Fibre technical support. Topology/Channel Speed) is set, multiple change instructions are set to the...
Page 109 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1 182 An error occurred. If this If this problem persists call HP problem persists call HP technical support. technical support.
Page 110 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1203 High Speed mode/MIX mode The configuration information was specified. However, has been already changed. there are addresses to which Check the settings, and High Speed mode/MIX mode request the setting of the...
Page 111 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1357 S-VOLs remain on the The specified port is for Fibre Fibre-RCU port. This XP Continuous Access. Delete operation may cause a fatal a logical path, and then retry damage to the S-VOLs.
Page 112 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 1906 The specified volume cannot Select another volume. be set as a command device because it is being used as a V-VOL for XP Snapshot.
Page 113 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 2032 Communication busy. Retry Retry the operation later. later. 1005 2082 Processing is disabled The host is mounted or the because the host is mounted device is reserved.
Page 114 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 2504 No settings can be made Release the reserved attribute because of a volume reserved of the target volume by using for RAID Manager.
Page 115 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 6040 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 116 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 55571 The target cannot be set Check the setting. because the number of targets exceeds the maximum that can be set in a port. 1005 55574 The setting of the specified...
Page 117 Table 26 Error Codes — Part Code 1005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1005 65660 The XP Thin Provisioning Associate the XP Thin volume is not associated with Provisioning volume with the a pool.
Page 118 Table 27 Error Codes — Part Code 1010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1010 5053 No port is specified. Check the content of the operation. 1010 5054 You must map at least one Check the content of the path to the command device.
Page 119 Table 27 Error Codes — Part Code 1010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1010 9017 LUN security will be applied To continue processing, click to the specified command [OK]. Otherwise, click device. Do you want to [Cancel].
Page 120 Table 28 Error Codes — Part Code 1 1 10 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1 1 10 1064 The specified host is already Correct the specified in use. contents, and request the setting of the configuration information again.
Page 121 Table 28 Error Codes — Part Code 1 1 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1 1 10 5050 The system cannot drop the host onto the port. 1 1 10 5051 The system cannot drop the Check the content of the host to the root.
Page 122 Table 28 Error Codes — Part Code 1 1 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1 1 10 9010 All the hosts connected to the target port can access only the LUNs defined in group #00.
Page 123 Table 28 Error Codes — Part Code 1 1 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1 1 10 9100 There are different security settings in the group. Do you want to re-configure? 1 1 10 9101 There are some WWN...
Page 124 Table 28 Error Codes — Part Code 1 1 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1 1 10 59336 The host is to be moved. Do To continue processing, click you want to continue? [OK].
Page 125 Table 29 Error Codes — Part Code 1205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1205 58387 A communication error If the same problem persists occurred while executing the despite retrying, check the contents of the setting. LAN setting between the SVP and the disk storage system.
Page 126 Table 30 Error Codes — Part Code 1305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1305 66575 Serial number tag exists in Check the contents of the the spreadsheet. However, spreadsheet. the serial number is not set or the destination serial number is different.
Page 127 Table 31 Error Codes — Part Code 1310 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 1310 69047 The specified command is not See the user guide. supported. 1310 69048 The operation cannot be Display the account window executed because the of the Remote Web Console, authority of Storage...
Page 128 Table 32 Error Codes — Part Code 2005 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2005 1002 The specified volume cannot Select another volume. be set as a command device or a component of a LUSE volume, because it is being used as the volume of XP Continuous Access, Business...
Page 129 Table 32 Error Codes — Part Code 2005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2005 1028 The number of volumes you The configuration information intend to combine into a has been already changed. LUSE volume exceeds the Check the settings, and maximum.
Page 130 Table 32 Error Codes — Part Code 2005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2005 1365 The different drive types Retry the operation after you cannot be combined to form make sure the different drive a LUSE volume.
Page 131 Table 32 Error Codes — Part Code 2005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2005 2015 An error occurred while A communication error connecting to the subsystem. occurs. If the error occurs Wait for a while, and then after retrying, call HP retry the operation.
Page 132 Table 32 Error Codes — Part Code 2005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2005 5013 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 133 Table 33 Error Codes — Part Code 2010 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2010 5030 The LUSE volume cannot be Correct the settings, and then released because the access retry. attribute of the specified volume is not Read/Write.
Page 134 Table 33 Error Codes — Part Code 2010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 2010 9151 Select the LUSE volume. 2010 9152 Warning: It is required to assign the LU Path for the LUSE volume.
Page 135 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 2085 Copying is in progress for XP Wait for a while and then Continuous Access, Business retry. Copy, ShadowImage for Mainframe, Auto LUN, or Compatible FlashCopy(R) pairs.
Page 136 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 2094 Some Business Copy, Some XP Business Copy, ShadowImage for ShadowImage for Mainframe, or Compatible Mainframe, or FlashCopy FlashCopy(R) pairs exist.
Page 137 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 2204 Devices to be maintained Devices to be maintained include journal volumes. include journal volumes. Delete or suspend all pairs Delete or suspend all pairs belonging to journal volumes belonging to journal volumes...
Page 138 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 2518 One of the following is Split the pair, and then retry defined: a Business Copy the operation. If a reserve pair, a ShadowImage for volume is defined, cancel the Mainframe pair, or a...
Page 139 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 5874 The program product Install the required program required for using the product. shredding function is not installed. 3005 5875 The specified volume is...
Page 140 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 8000 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 141 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 55509 An error occurred during SVP If this problem persists, call processing. HP technical support. If this problem persists, call HP technical support.
Page 142 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 56303 An error occurred during SVP If this problem persists, call processing. HP technical support. If this problem persists, call HP technical support.
Page 143 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 58466 The specified logical volume Specify another logical cannot be registered, volume. because an SCSI path is set to the logical volume.
Page 144 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 58570 V-VOL management area is Delete the XP Snapshot pairs, being used. and then retry the operation. Delete the XP Snapshot pair(s), and then retry the operation.
Page 145 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 65650 The specified volume is used Check the setting of the as a System Disk volume. specified volume. 3005 65659 The specified volume is used...
Page 146 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 65692 The specified volumes contain Select only the volumes that volumes that quick format quick format can be executed cannot be executed.
Page 147 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 68726 The capacity of XP Thin Check volume capacity for Provisioning volume (TP-VOL) the TP-VOL. is insufficient. 3005 68727 Shared memory is being Wait a few seconds, and...
Page 148 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 68797 Restoration of the pool has When the pool cannot be failed. Pool cannot be restored, do the following: restored when: Wait for a while, click processing takes time,...
Page 149 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 68799 Failed to change the When the pool threshold threshold of the pool. The cannot be changed, do the threshold of the pool cannot following: be changed when:...
Page 150 Table 34 Error Codes — Part Code 3005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3005 68824 The specified volume is Wait until the process for XP currently used by XP Continuous Access or XP Continuous Access or XP External Storage Access External Storage Access...
Page 151 Table 35 Error Codes — Part Code 3010 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 1046 The number of Cache Reduce the number of Cache Residency Manager settings Residency Manager settings, has exceeded the maximum and then retry the operation.
Page 152 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 5054 Execute any of the Check the content of the corresponding items below operation. before deleting LDEV: However, LDEV cannot be deleted when it is a remote command device.
Page 153 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 5058 Volume Initialize cannot be Reduce the number of performed because the volumes in the parity group, number of volumes that can and then retry.
Page 154 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 9001 Custom volume operation has The normal end was carried completed. out. Click [OK] and close the dialog. 3010 9010 Do you want to set the...
Page 155 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 55033 There is no specifiable LDEV Click [OK]. number. Probable causes and solutions are: The CU number that can be specified for the started SLPR is not assigned.
Page 156 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 58209 An error occurred in format Confirm whether the external processing or in Write to volume is zero formatted Control Blocks processing.
Page 157 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 65647 Reset operation cannot be Reduce the number of performed because the volumes in the parity group, number of volumes that can and then retry the operation.
Page 158 Table 35 Error Codes — Part Code 3010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3010 69045 System Disk becomes an To continue processing, click inaccessible volume from the OK. To stop processing, click host because of the area used Cancel.
Page 159 Table 36 Error Codes — Part Code 31 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 31 10 55504 Because CLPR numbers of the If the pool volumes cannot be specified pool volumes, registered, do the following: internal volumes/external Check if two or more CLPR volumes, cache modes, and...
Page 160 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 2085 Copying is in progress XP Wait a few seconds, and Continuous Access, Business then retry the operation. Copy, ShadowImage for Mainframe, Auto LUN, Compatible FlashCopy(R), or...
Page 161 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 2201 Processing cannot be Correct settings, and then performed because of Data retry. Retention settings. 3205 3003 An error occurred during SVP If this problem persists, call processing.
Page 162 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 8000 An error occurred during SVP Retry the operation. If this processing. If this problem problem persists, call HP persists, call HP technical technical support.
Page 163 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 8959 An error occurred on the An error occurred on the DKC side. If this problem DKC side. If this problem persists, call HP technical persists, call HP technical support.
Page 164 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 8971 Failed to update the Reboot the SVP computer, configuration information. and retry the operation. If this Call HP technical support. problem persists, call HP technical support.
Page 165 Table 37 Error Codes — Part Code 3205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3205 68740 Delete volume operation The delete volume operation cannot be performed to the cannot be performed to the XP Thin Provisioning volume XP Thin Provisioning volume associated with a pool.
Page 166 Table 38 Error Codes — Part Code 3210 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3210 55001 The specified V-VOL group Check the specified content, cannot be deleted. and retry the operation. A V-VOL group cannot be deleted when it contains the following volumes: A volume with path...
Page 167 Table 38 Error Codes — Part Code 3210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3210 59001 Are you sure you want to To continue processing, click delete the selected V-VOL [OK]. Otherwise, click group? [Cancel].
Page 168 Table 38 Error Codes — Part Code 3210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3210 65754 The same operation cannot Check the content of the be done, because the operation. discarding zero data is currently being executed.
Page 169 Table 38 Error Codes — Part Code 3210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3210 69057 The emulation type of an XP To continue processing, click Thin Provisioning volume [Normal] or [Force]. To stop (TP-VOL) that is set to processing, click [Cancel].
Page 170 Table 39 Error Codes — Part Code 3305 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 1035 The SSIDs are not defined. If If this problem persists, call this problem persists, call HP HP technical support. technical support.
Page 171 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 1075 In the VLL operation (Install Specify one or more than one CV, Make Volume, Volume operations of Install CV, Initialize and Volume to Make Volume, Volume Space), there are some...
Page 172 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 1913 The setting cannot be made Check the setting. because the specified LDEV is a remote command device. 3305 1914 The number of V-VOL(s) has...
Page 173 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 2085 Copying is in progress for Wait a few seconds, and XP Continuous Access, then retry the operation. Business Copy, ShadowImage for Mainframe, Auto LUN,...
Page 174 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 2093 Some Business Copy, Resynchronize some existing ShadowImage for XP Business Copy, Mainframe, or Compatible ShadowImage for FlashCopy(R) pairs exist. Mainframe, or FlashCopy Please resynchronize them.
Page 175 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 2205 Devices to be maintained Delete all pairs to which the include journal volumes. journal volumes belong. Delete all pairs to which the journal volumes belong.
Page 176 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 2520 An Auto LUN pair is defined. Release the pair definition, Release the pair definition and then retry the operation. and then retry the operation.
Page 177 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 6092 An error occurred during If this problem persists, call SVP processing. If this HP technical support. problem persists, call HP technical support.
Page 178 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 65692 The format processing for the Execute the format processing added volume has not been for the added volume. executed because the specified volumes contain volumes that quick format...
Page 179 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 65741 An error occurred during If this problem persists, call SVP processing. If this HP technical support. problem persists, call HP technical support.
Page 180 Table 39 Error Codes — Part Code 3305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 3305 68892 The item to be formatted Restore the pool that has includes an XP Thin been blocked by the XP Thin Provisioning volume Provisioning function.
Page 181 Table 40 Error Codes — Part Code 4005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4005 6040 An error occurred while If this problem persists, call connecting to the subsystem. HP technical support. Wait for a while, and then retry the operation.
Page 182 Table 40 Error Codes — Part Code 4005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4005 55265 The parity group that contains Check the settings, and then the volume(s) to which Cache retry the operation. Residency is set cannot be migrated to another CLPR.
Page 183 Table 40 Error Codes — Part Code 4005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4005 55540 The specified function is not Install the required program available because it requires product. When an SLPR is Cache Residency Manager.
Page 184 Table 40 Error Codes — Part Code 4005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4005 58514 Currently running microcode Call HP technical support. version does not support the specified operation. 4005 58709 A maintenance operation is Wait a few seconds, and in progress.
Page 185 Table 41 Error Codes — Part Code 4010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4010 5030 No deletion area is specified. Correct the specified content, Retry the operation to specify and retry. the deletion area. 4010 5058 The Cache Residency settings...
Page 186 Table 42 Error Codes — Part Code 4105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 4105 7060 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 187 Table 43 Error Codes — Part Code 5105 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5105 2002 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 188 Table 43 Error Codes — Part Code 5105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5105 6000 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 189 Table 43 Error Codes — Part Code 5105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5105 8916 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 190 Table 44 Error Codes — Part Code 51 10 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 51 10 59030 The monitoring data saved at To continue processing, click present will be deleted. [OK]. Otherwise, click [Cancel].
Page 191 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1080 The command was rejected Recover the blocked volume, due to one of the following and then retry the operation. reasons.
Page 192 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1 1 17 The volume specified as a The specified volume is migration source is already already used by Concurrent used as a volume of Copy.
Page 193 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1213 The command was rejected Recover the blocked volume, due to one of the following and then retry the operation. reasons.
Page 194 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1223 The volume(s) are already Retry the same operation. If used by Auto LUN. nothing changes, call HP technical support.
Page 195 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1233 The volume specified as a Specify another volume. migration target cannot be migrated, because it is already used as a volume of ShadowImage for Mainframe, XP Business Copy, or Compatible...
Page 196 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 1243 The specified volume is not a Retry the same operation. If source volume. nothing changes, call HP technical support.
Page 197 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 2029 A data transfer failure was Call HP technical support. detected. 5205 2030 A data transfer failure was Call HP technical support.
Page 198 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 5506 The specified volume cannot See the notes in the be migrated, because it is Interoperability with Other used as a P-VOL in either of Products section in the HP the following statuses.
Page 199 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 6510 The disk subsystem is busy. Retry the same operation Please wait for a while, and several times. If the same then retry the operation.
Page 200 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 7407 Cannot make proper Retry the same operation migration plan for this several times. If the same function. error occurs, call HP technical support.
Page 201 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 7420 There is insufficient Auto LUN Retry the same operation data to create migration several times. If the same plans.
Page 202 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 8530 An internal logic error Check the volume, or quit occurred. using XP Continuous Access. 5205 8531 An internal logic error Check the volume, or quit occurred.
Page 203 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 55225 The specified plan was not The specified plan cannot be created with the Remote Web released with Remote Web Console.
Page 204 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 55524 The specified volume(s) are Select another volume. already being used as XP Snapshot volume(s). 5205 55525 The specified volume(s) are Select another volume.
Page 205 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 55598 The specified volume is used Check the setting of the as a Delta resync volume for specified volume. XP Continuous Access Journal or Universal Replicator for Mainframe.
Page 206 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 57101 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 207 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 65699 The specified volume cannot Retry the operation after the be used because Quick quick format is completed. Format is performed on the specified volume.
Page 208 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 65712 The specified plan cannot be See the notes in the migrated, because the plan Interoperability with Other is a combination of an Products section in the HP internal volume of OPEN-V...
Page 209 Table 45 Error Codes — Part Code 5205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5205 65749 The volume specified as a Retry the operation after the migration source cannot be zero data discarding used, because it is a volume operation has completed.
Page 210 Table 46 Error Codes — Part Code 5210 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5210 59071 This migration plan extends To continue processing, click across multiple SLPRs. If you [OK]. To stop processing, perform this operation, the click [Cancel].
Page 211 Table 47 Error Codes — Part Code 5305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5305 2033 The SVP is now updating the Wait a few seconds, and statistics data. Wait for a click [Refresh]. while, and then select the [Refresh] button.
Page 212 Table 47 Error Codes — Part Code 5305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5305 51 10 The number of WWN(s) that Check the specified content, is monitored exceeds the and retry. maximum. 5305 51 1 1 The number of the WWN...
Page 213 Table 47 Error Codes — Part Code 5305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5305 7428 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 214 Table 47 Error Codes — Part Code 5305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5305 56524 This function cannot be used Select another window. To by the storage partition set this function, contact the administrator.
Page 215 Table 47 Error Codes — Part Code 5305 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5305 58574 An error occurred while The error may be caused by connecting to the subsystem. a temporary communication Wait for a while, and then failure.
Page 216 Table 49 Error Codes — Part Code 5310 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5310 1 1 10 You cannot use the following Remove the prohibited characters for the name: characters from the nickname. \ / , : ;...
Page 217 Table 49 Error Codes — Part Code 5310 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5310 5133 A WWN registered on an Delete the WWN from Performance Control group Performance Control Group cannot be deleted. first.
Page 218 Table 49 Error Codes — Part Code 5310 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 5310 9329 To continue initialization, If you click [OK] on the next select OK on the next window, the settings on port window.
Page 219 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 6012 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 220 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8704 The specified number of Check the paths status and paths is less than the reestablish the paths. minimum number of paths on the RCU option screen due to a communication error...
Page 221 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8714 An internal error occurred. Call HP technical support. 6005 8715 Invalid number of paths. The specified number of paths is not within the acceptable path range of 0 to 4.
Page 222 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8728 The number of minimum Take either of the following paths exceeds the number of actions: normal paths. Add normal paths, and then delete the paths.
Page 223 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8739 NVS status of MCU is not The MCU NVS status active. specified by the host is not active.
Page 224 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8745 A volume cannot be used as Select another volume. an R-VOL when: it is used by Compatible XRC.
Page 225 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8755 The serial number, SSID or Take either of the following CU number of the RCU is actions: invalid.
Page 226 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8766 XP Continuous Access is not The device emulation type of supported under the R-VOL the R-VOL does not support Device emulation type.
Page 227 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8776 A volume cannot be used as Select another volume. an M-VOL when: it is used by XP Continuous Access Journal or Universal Replicator for Mainframe.
Page 228 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8791 The specified M-VOL is still Vary the concerned path online from another HOST. offline from the other host, and then retry the operation.
Page 229 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8796 The operation failed because Check the status of the the specified R-VOL applied specified R-VOL from the host to any of the following: or the SVP.
Page 230 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8803 Too many RCUs in this CT The add pair operation failed Group. because there are too many RCUs in this CT group.
Page 231 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8809 Wait. Retry Add Pair Add/resume pair operation (Paircreate)/Resume Pair failed. The specified volume (Pairresync) operation in a or another volume in the few minutes.
Page 232 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8820 The specified R-VOL is not a The XP Continuous Access permissible condition of XP operation failed, because Continuous Access.
Page 233 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8832 Wait a few minutes and retry Check the status of the the Add Pair (Paircreate) / specified M-VOL (P-VOL), and Resume Pair (Pairresync) then retry the Add Pair operation.
Page 234 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8843 Suspend(Pairsplit-r) operation The operation failed, because failed because specified of one of the following volume or other volume in the reasons: same group is not in The specified volume is...
Page 235 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8852 R-VOL status change failed Confirm the R-VOL status. after M-VOL status change. Confirm R-VOL status. 6005 8854 Delete Pair (Pairsplit-S) The operation failed, because operation failed because...
Page 236 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8859 Delete Pair (Pairsplit-S) The pair status does not allow operation with C/T option this operation. Refresh and failed because some R-VOLs confirm the pair status in the group are in Duplex...
Page 237 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8876 There are no PCBs which Confirm the PCB type and try corresponds to the specified the operation again with a port type.
Page 238 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8897 LUs exist on the port. Delete the LUs defined on the port and retry the operation. 6005 8898 Pending data exists on the Add another path, or delete...
Page 239 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8907 The extended SM is not Install the extended shared equipped in RCU. memory to RCU according to the installation instruction of the extended shared memory for remote copy (Shared...
Page 240 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8922 The specified MCU does not Confirm whether the MCU support serial remote copy supports serial remote copy connections.
Page 241 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8938 The Paircreate operation with Delete all the pairs with the the serial remote copy Fibre Channel remote copy connection failed because connection in the specified there are pairs with the Fibre...
Page 242 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8973 The operation failed because Check the status of the the specified R-VOL was used specified R-VOL. for Flex Copy XP. 6005 8975 Failed to create a pair,...
Page 243 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 8989 The specified M-VOL is a Check the version of the volume used by FlashCopy microcode of the storage Mirroring V2.
Page 244 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 58320 The operation failed because If the Add Pair (Paircreate) the specified R-VOL was used operation failed: by XP Continuous Access When the RCU runs on the Journal or Universal 2DC configuration in...
Page 245 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 58452 A pair cannot be created Check the licensed capacity because the licensed capacity of Data Retention Utility on of Data Retention Utility on the RCU side, or confirm the RCU side is insufficient or...
Page 246 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 58498 A pair cannot be created Specify another volume. because the specified M-VOL is being used as a pool volume.
Page 247 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 58712 The licensed capacity of XP Check the licensed capacity Continuous Access or of this program product and TrueCopy for Mainframe on the related program products.
Page 248 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 58715 The licensed capacity of XP Check the licensed capacity Continuous Access of this program product and Asynchronous or TrueCopy the related program products.
Page 249 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 68757 The Paircreate operation Select another volume that is failed because the specified not used by other program S-VOL, which is an XP Thin products such as XP Business Provisioning volume, is...
Page 250 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 68796 The operation failed. The Refresh the window, and operation cannot be confirm the pair status of the accepted in the pair status of specified volume.
Page 251 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 68827 The operation failed, because The serial number of the there was an error in the local DKC cannot be set specified parameter.
Page 252 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 68872 The operation failed, because Check the volume setting. the specified volume was not a volume of External Storage. 6005 68873 The operation failed, because...
Page 253 Table 50 Error Codes — Part Code 6005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6005 68891 The operation failed, because Confirm the serial numbers of the following specified the MCU and RCU, and parameters did not match the confirm the quorum disk ID.
Page 254 Table 51 Error Codes — Part Code 6007 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6007 6002 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 255 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 5030 The displayed information Specify what you register, has not been changed. and retry. 6010 5034 There are no RCUs in the CU. Correct the specified Try again after registering contents, and retry.
Page 256 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 7303 An error occurred in the client Call HP technical support. logic. 6010 7440 An error occurred during If this problem persists, call processing.
Page 257 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 9070 Are you sure you want to To delete the specified RCU, delete the specified RCUs? click [OK]. Otherwise, click [Cancel].
Page 258 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 91 13 Are you sure you want to To clear the XP Continuous clear SIMs of XP Continuous Access related SIM, click Access? [OK].
Page 259 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 9129 Recovered from the error that Click [OK] to continue occurred when copying processing. started. 6010 9154 As a result of this operation, Follow the instructions in the you will not be able to re-start message.
Page 260 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 9308 You set the same path more Because there were than once. The duplicate overlapped paths in the paths are excluded.
Page 261 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 9360 The specified value exceeds Check the specified values the range. Alternatively, the and retry the operation. relationship between the specified values is not appropriate.
Page 262 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 59030 The monitoring data saved at To continue the operation, present will be deleted. click [OK]. To cancel the operation, click [Cancel].
Page 263 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 65772 An external volume is Assign another external assigned to two or more volume not used in the quorum disk IDs.
Page 264 Table 52 Error Codes — Part Code 6010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6010 69034 The number of preview data Click [OK]. Apply the exceeds the maximum. Preview data to the disk storage system, and then No more preview data can retry the operation.
Page 265 Table 53 Error Codes — Part Code 6105 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6105 56524 This function cannot be used Select another window. To by the storage partition set this function, contact the administrator.
Page 266 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 71 1 1 An error occurred during SVP If the error occurs after processing. If this problem retrying, call HP technical persists, call HP technical support.
Page 267 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8706 Parameter specified by XP Enter the correct data. Continuous Access operation is invalid. 6505 8708 The pair status of the Refresh the window, and secondary data volume is check the pair status.
Page 268 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8721 Path creation has not finished Check the path connections yet. between the local and the remote storage systems, and then retry the operation.
Page 269 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8731 The existing logical addresses Delete the DKC once, and are not the same. then add the DKC using the same logical address.
Page 270 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8744 The specified primary data Check whether the primary volume cannot be used. data volume is in any of the following conditions: Data in the primary data volume is being copied;...
Page 271 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8753 An internal error occurred. Check the SSB log, and then call HP technical support. 6505 8757 One side of the cache or the Check the status of the cache shared memory is blocked in and the shared memory in the...
Page 272 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8795 The operation failed because Check the status of the the specified primary data primary data volume from the volume was used by Business host or the SVP.
Page 273 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8819 The specified secondary data Check the status of the volume must not be: secondary data volume. in an intervention-requested condition in a protected condition...
Page 274 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8835 The Add Pair (Paircreate) See the license key at the operation failed because you secondary storage system tried to create volume pairs and check the licensed which exceeded the licensed...
Page 275 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8922 The primary subsystem does Check whether the primary not support remote copy via storage system supports serial interface. remote copy via serial interface.
Page 276 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 8977 The Add Pair (Paircreate) Check the status of the operation failed because the specified secondary data specified secondary data volume.
Page 277 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58017 The specified volume is being Check the status of the connected by a mainframe specified volume from the host.
Page 278 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58031 The threshold for starting Ensure that the threshold for creation of asynchronous starting creation of journal must be larger than asynchronous journal is the threshold for ending larger than the threshold for...
Page 279 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58070 Invalid parameter (Suspend Check the specified Suspend Condition-Master Journal Condition parameter. Failure). 6505 58071 Invalid parameter (Suspend Check the specified Suspend Condition-Restore Journal Condition parameter.
Page 280 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58084 The specified primary data Check the status of the volumes cannot be paired specified primary data with another volume, because volume.
Page 281 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58096 The specified volume is a Check the status of the reserve volume of a specified volume from the mainframe host.
Page 282 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58105 XP Continuous Access Journal XP Continuous Access Journal or Universal Replicator for or Universal Replicator for Mainframe is not installed in Mainframe must be installed the remote subsystem.
Page 283 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58270 The Add Pair (Paircreate) Check the mirror status and operation failed because of the mirror ID of the specified either of the following restore journal group.
Page 284 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58277 The specified secondary data Check data volumes in the volume is not registered in the specified secondary journal specified journal group.
Page 285 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58287 The command was rejected Check the command because the command was parameters. issued to the secondary data volume.
Page 286 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58296 The specified volume is used Check whether the specified by another program product. volume is used by any of the following program products: XP Auto LUN XP Snapshot...
Page 287 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58323 The Add Pair (Paircreate) Specify another primary data operation failed because the volume, and retry the specified primary data operation.
Page 288 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58329 The Add Pair (Paircreate) Call HP technical support. operation or the Resume Pair (Pairresync) operation cannot be performed because the journal cache for the master journal group is not empty and contains data.
Page 289 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58342 The specified volume cannot Check the setting of the be used as a journal volume volume in the Data Retention because of a Data Retention Utility window or the Volume Utility setting or a Volume...
Page 290 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58353 The operation failed because Extract the possible the specified secondary data combination of program volume was one of the products from the following: combinations of program...
Page 291 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58355 The specified secondary data Check whether the specified volume is used by one of the secondary data volume is following program products.
Page 292 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58485 The Add Pair (Paircreate) Confirm the state of the operation failed because the specified primary data in the specified primary data XP Snapshot window.
Page 293 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58502 The operation failed because Confirm the licensed capacity the capacity of the secondary of the Data Retention Utility subsystem has exceeded the of the secondary storage licensed capacity of Data...
Page 294 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58532 The Add Pair (Paircreate) Check the emulation type of operation failed because the the master and the restore emulation type of the master journal group.
Page 295 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58564 The Add Pair (Paircreate) Confirm that the shredding operation failed because the has completed in the Data specified primary data Retention Utility window, and volume is being shredded by...
Page 296 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58595 The Paircreate operation Confirm that the XP failed because the XP Continuous Access Journal Continuous Access Journal function of the secondary function of the secondary storage system supports LUSE...
Page 297 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58606 Journal groups cannot be Check the status of the deleted from the extended specified extended consistency group (EXCTG), consistency group (EXCTG).
Page 298 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58616 The specified journal group Check the state of the journal cannot be added to extended group in the storage system consistency group (EXCTG).
Page 299 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58629 The specified operation failed If this problem persists call HP because of a temporary path technical support. failure.
Page 300 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58685 Delta resync operation failed Check the following for the because the specified specified primary data primary data volume was not volume: a data volume of XP The volume is an M-VOL...
Page 301 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58690 The recovery to the status Check the status on the ready for Delta resync failed, primary data volume. because the status of the specified primary data volume was one of the...
Page 302 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58696 The specified volume cannot Check the I/O suppression be used as a journal volume mode of the specified because the volume is an volume.
Page 303 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58704 The operation to change the Check the status of the data status to the status ready for volumes in the XP Continuous Delta resync failed because Access, TrueCopy for...
Page 304 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58717 The licensed capacity of XP Check the licensed capacity Continuous Access of this program product and Asynchronous or TrueCopy the related program products.
Page 305 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 58720 The licensed capacity of XP Check the licensed capacity Continuous Access of this program product and Asynchronous or TrueCopy the related program products.
Page 306 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 66592 The format of CU (P-VOL) is Check the contents of the invalid. spreadsheet. 6505 66593 The value entered as CU Check the contents of the (P-VOL) is outside the setting spreadsheet.
Page 307 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 66612 The format of CU (local VOL) Check the contents of the is invalid. spreadsheet. 6505 66613 The value entered as CU Check the contents of the (local VOL) is outside the spreadsheet.
Page 308 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 66633 The number of digits of R-JNL Check the contents of the is invalid. spreadsheet. 6505 66634 The format of R-JNL is invalid. Check the contents of the spreadsheet.
Page 309 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 66654 The number of digits of Check the contents of the Range is invalid. spreadsheet. 6505 66655 The format of Range is Check the contents of the invalid.
Page 310 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 66675 The syntax of the definition Check the contents of the statement is invalid. spreadsheet. 6505 66676 The specified P-VOL is not Check the contents of the mounted.
Page 311 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68007 The Add Pair (Paircreate) Confirm that the LDKC operation failed. number of the secondary data volume and the LDKC The LDKC number of the number of the restore journal specified secondary data...
Page 312 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68024 The operation failed because Check the microcode version the current microprogram of the connected storage version does not support system.
Page 313 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68781 The specified operation failed The specified master journal because “LU” was specified group runs on the 2DC for the Error Level.
Page 314 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 6881 1 The specified volume cannot Specify a volume that is not be used as a journal volume used by FICON(R) Data because it is used by Migration.
Page 315 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68850 The operation failed, because Specify Group for the the consistency (CT) group of [Range], and then retry the specified data volume was operation.
Page 316 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68863 The operation failed, because Confirm the number of remote the number of assignable command devices that has remote command device to a been assigned to a mirror.
Page 317 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68905 The operation failed because Verify the attribute of the the attribute of the specified specified journal group. journal group was Master &...
Page 318 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68914 The operation failed because Verify that the status transition the specified primary data of the pair in the mirror is volume was used by another completed, and then retry the mirror of the journal group,...
Page 319 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68917 The operation failed because Verify the status of specified the specified secondary data secondary data volume. volume was in one of the following status.
Page 320 Table 54 Error Codes — Part Code 6505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6505 68925 The operation to create a Verify the primary data pair for Delta resync failed volume. because the pair status of the specified primary data volume was not PAIR.
Page 321 Table 56 Error Codes — Part Code 6510 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 5030 The displayed information Specify the data that you has not been changed. want to register in the SVP and retry the operation.
Page 322 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 9024 Are you sure you want to Ensure that the associated exchange the specified ports? channel paths are offline. Confirm the associated channel paths are off-line.
Page 323 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 91 15 The monitoring was stopped Click [OK]. by another operator. The graph will be closed. 6510 91 16 Another operator has Click [OK].
Page 324 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 9308 You set the same path more Because there are duplicated than once. The duplicate paths in the added paths, the paths are excluded.
Page 325 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 55229 You want to forcibly delete Specify normal deletion, or pairs, but there are some specify Group as the range. pairs where Group is not specified as the range.
Page 326 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 59010 WARNING: Check the contents of the primary and secondary Initial copy mode None is volumes. If the contents selected for some volume match, click [Yes].
Page 327 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 59043 The number of journal Reduce the number of journal volumes in some journal volumes to be registered, or groups exceeds the increase the number of maximum.
Page 328 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 591 15 The number of Preview data Check the amount of the may have exceeded the limit, Preview data. If the amount or too large number of data of the Preview data is too is selected.
Page 329 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 59329 The serial number of the local Check the check box when DKC is entered. Select the you add the journal group of check box when you add the the local DKC to the extended journal group of the local...
Page 330 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 65806 The operation failed because Verify the journal group of the journal group of the the specified data volume. specified data volume was not a journal group for the 3DC configuration of three...
Page 331 Table 56 Error Codes — Part Code 6510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6510 69018 There are two or more LDKC Check the LDKC number for numbers for the specified the specified data volume, data volume.
Page 332 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 7303 An error occurred in client Call HP technical support. logic. 6610 7440 An error occurred during If the error occurs after processing.
Page 333 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 9104 Do you want to change the To apply settings in the mode? Preview list to the disk storage system, click [OK].
Page 334 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 9122 Are you sure you want to To export, click [OK]. To export pair status? cancel the operation, click [Cancel].
Page 335 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 55039 You are specifying Group for Check the range setting. If the range and trying to you specify Group, select manipulate the same mirror.
Page 336 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 59004 An error occurred. Check the Check the error information. error details. 6610 59005 An invalid value is specified. Specify the valid value.
Page 337 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 59031 The monitoring data saved at To continue processing, click present will be deleted when [OK]. To stop processing, the monitoring switch is set to click [Cancel].
Page 338 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 59100 The same volume is stored Use the sort function to more than once in the identify volumes with the Preview list.
Page 339 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 591 15 The number of Preview data Check the amount of the may have exceeded the limit, Preview data. If the amount or too large number of data of the Preview data is too is selected.
Page 340 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 59323 The entered parameter is Check the entered parameter. invalid. The serial number, the LDKC number or the journal group to be added is not specified.
Page 341 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 59335 The value of the path watch Check the value of the path time is not entered or is watch time.
Page 342 Table 58 Error Codes — Part Code 6610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6610 69019 The number of data volumes Reduce the number of data exceeds the maximum. volumes and retry the operation.
Page 343 Table 59 Error Codes — Part Code 6805 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6805 8659 Install necessary PCBs. Install necessary PCBs. 6805 55009 An invalid cache resource Correct the cache resource number (CLPR No.) was number (CLPR No.), and then detected.
Page 344 Table 59 Error Codes — Part Code 6805 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6805 55219 The Sleep Time setting is Correct the setting, and then incorrect. retry. If the same problem persists despite retrying, call HP technical support.
Page 345 Table 60 Error Codes — Part Code 6810 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 6810 55219 The Sleep Time setting is Correct the setting, and then incorrect. retry. If the same problem persists despite retrying, call HP technical support.
Page 346 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 6023 The SVP is busy. Please wait If the same problem persists for a while, and then retry the despite retrying, call HP operation.
Page 347 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8505 The command has been See the section describing rejected, because the creating pairs and the pair operation will not function status in the HP with the current pair status.
Page 348 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8518 You cannot create a pair, Check the emulation type. because the track format is different for each. Make sure that the specified emulation type is the same for both.
Page 349 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8533 The command has been Specify the volume of the rejected, because the supported emulation type. emulation type of the When the S-VOL is used as a specified volume is not data volume of XP Continuous...
Page 350 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8549 The P-VOL is not You cannot execute the implemented. operation for the volume which is not implemented. 7005 8550 The command has been...
Page 351 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8562 The command code sender is Call HP technical support. invalid. 7005 8563 The volume type is invalid. Check the contents, and retry.
Page 352 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8580 The specified volume is for You cannot use the volume. backup servers only. Specify other volume, and retry the operation.
Page 353 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8597 The command has been Pairs cannot be created with rejected, because the number the specified P-VOL any of pairs created with the more.
Page 354 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8608 The specified S-VOL is not Refresh the screen, and retry defined. the operation. 7005 8609 The specified volume is not Check the contents, and retry.
Page 355 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8623 The command has been The S-VOL of XP Continuous rejected because the Access pair or XP External specified volume is used as Storage Access Manager S-VOL of XP Continuous...
Page 356 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8638 The command has been You cannot execute the rejected, because the specified operation. Release specified P-VOL is set for use the Cache Residency in Cache Residency Manager setting for the...
Page 357 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 8647 The Reverse Copy command Delete the XP Continuous has been rejected, because Access pair. the S-VOL is shared as the S-VOL of a XP Continuous Access pair.
Page 358 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 55264 The command was rejected, You cannot create a pair because you tried to create using these volumes. a volume pair formed with a To create a pair by using a volume to which VMA is set...
Page 359 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 58001 The operation of the L2 pair Wait until the L1 pair status failed because the L1 pair changes to PSUS or PAIR, was in COPY(SP) status, and then retry the operation.
Page 360 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 58262 A pair cannot be created Add sufficient shared memory because shared memory for to create a pair. differential tables is insufficient.
Page 361 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 58480 The operation cannot be Specify another volume. performed, because the specified S-VOL is a V-VOL for XP Snapshot. 7005 58481 The operation cannot be...
Page 362 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 58573 This function is not supported. Check whether the DKCMAIN microcode version and the SVP microcode version are mismatched. 7005 58574 An error occurred while...
Page 363 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 58630 The operation failed because The command cannot be the specified P-VOL was used executed in the current status by Delta resync of XP of XP Continuous Access Continuous Access Journal.
Page 364 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 68739 The command has been Associate the XP Thin rejected, because the Provisioning volume with a specified reserved volume is pool, and then retry the an XP Thin Provisioning operation.
Page 365 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 68803 The Quick Restore command Delete the XP Continuous has been rejected because Access Asynchronous pair, P-VOL or S-VOL of Business and then retry the operation, Copy is combined with XP or use Reverse Resync...
Page 366 Table 61 Error Codes — Part Code 7005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7005 68839 The command has been Wait until the process of rejected, because the discarding zero data is specified reserved volume is completed, and then retry the a volume of XP Thin operation.
Page 367 Table 63 Error Codes — Part Code 7010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7010 5121 The data has been changed. Apply the data in the Preview If you select another tab List. To stop the transaction, (page), the settings will be click [OK] and continue the discarded.
Page 368 Table 63 Error Codes — Part Code 7010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7010 9002 The request operation has The operation was ended completed. normally. Execute the next operation. 7010 9005 An error occurred. Check the An error occurred during the error code.
Page 369 Table 63 Error Codes — Part Code 7010 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7010 66102 Information was updated by Click [OK], and then continue other users. The list will scroll the operation. to the top.
Page 370 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8501 The command has been Wait until the previous rejected, because the operation completes. previous command is being processed.
Page 371 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 851 1 You cannot reserve the Detach the S-VOL from the volume, because a path host, or delete the XP group is set.
Page 372 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8528 An internal logic error Call HP technical support. occurred. 7105 8529 An internal logic error Call HP technical support. occurred.
Page 373 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8542 Failed to complete the initial Call HP technical support. shared memory setup. 7105 8543 The shared memory size is Call HP technical support.
Page 374 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8558 The command has been Restore the blocked rejected, because the volume, and then retry the specified volume is blocked operation.
Page 375 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8575 The selected volume is not a Check the status of the reserved volume. volume. 7105 8576 No reserved volume is Check the contents, and retry.
Page 376 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8593 The S-VOL is a source volume Release the XP Auto LUN for Auto LUN. setting. 7105 8594 The S-VOL is a target volume Release the XP Auto LUN for Auto LUN.
Page 377 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8607 The command has been The requested command rejected, because the cannot be executed in the specified T-VOL is used as a current status of TrueCopy for M-VOL of TrueCopy for Mainframe pair.
Page 378 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8622 The command has been The P-VOL of TrueCopy for rejected, because the Mainframe pair cannot be specified volume is used as a used as a reserved volume.
Page 379 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8638 The command has been You cannot execute the rejected, because the specified operation. Release specified S-VOL is set for use the Cache Residency in Cache Residency Manager Manager for Mainframe...
Page 380 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8649 Because the boot device is Check the specified volume the T-VOL in the DeletePair number. command, the flag does not match.
Page 381 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 8920 Because a L1 pair is F-Copy, Wait for Flash Copy you cannot operate to L2. processing of a L1 pair being finished, and then execute operation of target pair.
Page 382 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 56303 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 383 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 58260 The command has been The requested command rejected, because the cannot be executed with the specified S-VOL is used as a current status of the TrueCopy M-VOL of TrueCopy for for Mainframe pair.
Page 384 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 58351 The Quick Restore command Stop using the specified pair has been rejected, because for Universal Replicator for the specified pair is Mainframe, or specify a composed of internal and...
Page 385 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 58575 An error occurred while If this problem persists, call connecting to the subsystem. HP technical support. Wait for a while, and then retry the operation.
Page 386 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 68747 The command has been Cancel the setting to use the rejected because FICON(R) T-VOL with other program Data Migration Source products, and then retry the Volume is used in the...
Page 387 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 68770 The XP Business Copy Release the Cache Residency Operation for FICON(R) Data Manager for Mainframe Migration failed, because the setting in the T-VOL.
Page 388 Table 64 Error Codes — Part Code 7105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 7105 68803 The Quick Restore command Delete the TrueCopy has been rejected because Asynchronous for Mainframe S-VOL or T-VOL of pair, and then retry the ShadowImage for Mainframe operation, or use Reverse...
Page 389 Table 65 Error Codes — Part Code 71 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 71 10 5121 The data has been changed. Apply the data in the Preview If you select another tab List.
Page 390 Table 65 Error Codes — Part Code 71 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 71 10 9108 The option has been To continue processing, click changed. If you continue [OK]. Otherwise, click processing before applying [Cancel].
Page 391 Table 65 Error Codes — Part Code 71 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 71 10 65662 The data has been changed. To continue processing, click The settings will be discarded [OK]. Otherwise, click if you continue the [Cancel].
Page 392 Table 66 Error Codes — Part Code 8005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8005 5099 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 393 Table 66 Error Codes — Part Code 8005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8005 8001 An error occurred while Retry the same operation connecting to the subsystem. several times. If the same Wait for a while, and then error occurs, call HP technical retry the operation.
Page 394 Table 66 Error Codes — Part Code 8005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8005 55265 The parity group that contains Check the settings, and then the volume(s) to which Cache retry the operation. Residency Manager is set cannot be migrated to another CLPR.
Page 395 Table 66 Error Codes — Part Code 8005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8005 58574 An error occurred while If this problem persists, call connecting to the subsystem. HP technical support. Wait for a while, and then retry the operation.
Page 396 Table 67 Error Codes — Part Code 8105 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1002 The specified volume cannot Select another volume. be set as a command device or a component of a LUSE volume, because it is being used as the volume of XP Continuous Access, Business...
Page 397 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 101 1 An error occurred. If this The volume which links as an problem persists, call HP expanded LU extend over technical support.
Page 398 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1024 An error occurred. If this Fibre topology information is problem persists, call HP invalid. (The specified value technical support.
Page 399 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1064 You are trying to register the The configuration information same WWN as the already has been already changed. registered one.
Page 400 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1 1 1 1 An error occurred. If this A nickname is not specified problem persists, call HP when the configuration technical support.
Page 401 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1 127 An error occurred. If this CHA high-speed mode is problem persists, call HP specified to an unmounted technical support.
Page 402 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1 135 An error occurred. If this When the PORT information problem persists, call HP (Fibre Address/Fibre technical support. Topology/Channel Speed) is set, multiple change instructions are set to the...
Page 403 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1203 High Speed mode/MIX mode The configuration information was specified. However, has been already changed. there are addresses to which Check the settings, and High Speed mode/MIX mode request the setting of the...
Page 404 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1356 The host group cannot be The port you are trying to set added to the Initiator port. is for XP Continuous Access.
Page 405 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 1912 The specified volume is a Correct the settings, and then remote command device, and retry the operation. therefore the command device setting or the command device security...
Page 406 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 2015 An error occurred while A communication error connecting to the subsystem. occurs. If the error occurs Wait for a while, and then after retrying, call HP retry the operation.
Page 407 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 2516 A XP Continuous Access, XP Cancel or suspend the pair Continuous Access Journal, definition, and then retry the or Universal Replicator for operation.
Page 408 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 3006 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 409 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 5721 The parameter is invalid. Correct the invalid parameter. 8105 5730 Duplicate definition error. Write one definition only in each tag.
Page 410 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 5757 The same WWN is already Correct the WWN. registered. 8105 5758 No name can be added to Correct the group ID.
Page 411 Table 67 Error Codes — Part Code 8105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8105 6524 The port information is Correct the port information inconsistent with PCB mode or the PCB mode information. information.
Page 412 Table 68 Error Codes — Part Code 8107 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8107 5641 The number of lines exceeds Check the setting. the maximum number of lines of a spreadsheet. 8107 5642 The number of characters Check the setting.
Page 413 Table 69 Error Codes — Part Code 81 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 81 10 5773 The file path of the specified Correct the specified file by [File Name on Client] contents, and retry the is incorrect.
Page 414 Table 70 Error Codes — Part Code 81 1 1 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 81 1 1 5632 Modify mode released due Modify mode released due to inactivity. Restart Modify to inactivity. Restart Modify mode (press the mode (press the mode-switching button again)
Page 415 Table 73 Error Codes — Part Code 8310 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8310 59018 The On-Demand status of all To change the On-Demand the groups of ports under the status of all the groups of selected CHA is going to be ports under the selected changed.
Page 416 Table 74 Error Codes — Part Code 8505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8505 8002 An error occurred during SVP If the same problem persists processing. If this problem despite retrying, call HP persists, call HP technical technical support.
Page 417 Table 74 Error Codes — Part Code 8505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8505 55016 The value set as the maximum Set the correct value for the number of connections to maximum number of each SLPR is invalid.
Page 418 Table 74 Error Codes — Part Code 8505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8505 55026 The specified port name (port Specify the correct port name number) is invalid. (port number), and then retry the operation.
Page 419 Table 74 Error Codes — Part Code 8505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8505 56527 While another user is logged Confirm that no user is into Remote Web Console, logged into Remote Web you cannot edit the Console, and then retry the information of the SLPR that...
Page 420 Table 74 Error Codes — Part Code 8505 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8505 58316 Parity groups in CLPR are Wait a few seconds, and being migrated in the storage then retry the operation. system.
Page 421 Table 76 Error Codes — Part Code 8510 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8510 5030 The display information has Specify what you want to not been changed. register, and retry the operation. 8510 7060 An error occurred in client If this problem persists, call...
Page 422 Table 76 Error Codes — Part Code 8510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8510 55636 The CLPR that has some Migrate all parity groups in parity groups cannot be the CLPR to another CLPR, deleted.
Page 423 Table 76 Error Codes — Part Code 8510 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8510 591 10 SSIDs that are associated Check the settings. with the selected CU cannot be added to this SLPR, because too many SSIDs have been set in the SLPR.
Page 424 Table 77 Error Codes — Part Code 8605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8605 66822 The contents of the e-mail Register the email address address information file are information file again. invalid. 8605 66823 A failure occurred while...
Page 425 Table 78 Error Codes — Part Code 8610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 8610 65765 The same e-mail addresses Remove the duplicated email are specified. addresses, and then register it again. 8610 69081 Send a test message.
Page 426 Table 79 Error Codes — Part Code 9005 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9005 71 1 1 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 427 Table 80 Error Codes — Part Code 9007 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9007 5099 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 428 Table 82 Error Codes — Part Code 9105 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9105 551 1 The program product is not Click [OK], and then install installed. the program product. 9105 5600 The settings of the security Click [OK], correct the group are invalid.
Page 429 Table 82 Error Codes — Part Code 9105 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9105 7060 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists call HP technical support.
Page 430 Table 83 Error Codes — Part Code 9107 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9107 6012 An error occurred during SVP An error occurred during SVP processing. If this problem processing. If this problem persists, call HP technical persists, call HP technical support.
Page 431 Table 84 Error Codes — Part Code 91 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 91 10 5619 The R-VOL/T-VOL cannot be Click [OK]. Ensure that the set to the specified security R-VOL/T-VOL is not set to the group.
Page 432 Table 84 Error Codes — Part Code 91 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 91 10 9084 The specified group includes To delete the group, click some hosts. Are you sure you [Yes].
Page 433 Table 85 Error Codes — Part Code 9205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9205 5041 The number of issued Reduce the number of set commands exceeds the demands. maximum. 9205 551 1 The program product is not Install the program product.
Page 434 Table 85 Error Codes — Part Code 9205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9205 8126 The logical volume is Check the logical volume configured as a command configuration, and then retry device. the operation.
Page 435 Table 85 Error Codes — Part Code 9205 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9205 66008 The number of digits is Check the contents of the invalid. Volume Retention Manager spreadsheet. 9205 66009 The entered value is outside Check the contents of the the setting range.
Page 436 Table 87 Error Codes — Part Code 9605 Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 5013 An error occurred during SVP If this problem persists, call processing. If this problem HP technical support. persists, call HP technical support.
Page 437 Table 87 Error Codes — Part Code 9605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 8120 The specified logical volume Specify an open-system does not exist. volume. 9605 8122 This logical volume is busy. Retry a little later.
Page 438 Table 87 Error Codes — Part Code 9605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 8150 You tried to set a retention Check the logical volume, term to a logical volume and then retry the operation. whose access attribute is not Read Only or Protect.
Page 439 Table 87 Error Codes — Part Code 9605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 58413 The attribute of the virtual Select another volume. volume of the XP Snapshot cannot be changed. 9605 58414 The attribute of the P-VOL or Select another volume.
Page 440 Table 87 Error Codes — Part Code 9605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 58432 A VMA cannot be set up on Release XP Auto LUN's use of this logical volume because the logical volume, or set up Auto LUN is using the logical the VMA on another logical...
Page 441 Table 87 Error Codes — Part Code 9605 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9605 58448 The specified logical volume Retry the operation after the is blocked, or the LDEV is logical volume has recovered being formatted or shredded.
Page 442 Table 88 Error Codes — Part Code 9610 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 9610 58405 There is an invalid value in If this problem persists, call the Extent information. HP technical support. 9610 59106 If you set VMA, all the data...
Page 443 Table 90 Error Codes — Part Code 101 10 (continued) Part Error Error Message Recommended Action Severity Failure Code Number Level Level 101 10 65720 The length of the character Specify a valid password. string of the specified password is invalid. 101 10 65725 Specify the file name.
Page 444: Support And Other Resources
2 Support and Other Resources Related Documentation HP StorageWorks XP24000/XP20000 Disk Array Owner Guide HP StorageWorks XP24000/XP20000 Remote Web Console User Guide You can find these documents on the HP Manuals website: http://www.hp.com/support/manuals In the Storage section, click Disk Storage Systems and then select a product. Conventions for Storage Capacity Values HP XP storage systems use the following values to calculate physical storage capacity values (hard disk drives):...
Page 445: Hp Websites
http://www.hp.com/go/e-updates After registering, you will receive email notification of product enhancements, new driver versions, firmware updates, and other product resources. HP Websites For additional information, see the following HP websites: http://www.hp.com http://www.hp.com/go/storage http://www.hp.com/support/manuals http://www.hp.com/storage/spock Documentation Feedback HP welcomes your feedback. To make comments and suggestions about product documentation, send a message to storagedocsFeedback@hp.com.
Page 446: Glossary
Glossary Application program interface. Command control interface. An HP RAID manager. Channel adapter. A device that provides the interface between the array and the external host system. Occasionally, this term is used synonymously with the term channel host interface processor (CHIP).
Page 447 M-VOL Main volume. Main control unit. Mirror unit. Nonvolatile storage. P-VOL Primary volume. P.P. Program Product. Petabyte; equals 1,000^5 bytes (for physical storage such as hard disk drives) or 1,024 TB or 1,024^5 bytes (for logical storage). Printed circuit board. PDEV Physical device.
Page 448 V-VOL Virtual volume. VDEV Virtual device. Virtual LVI/LUN. Volume management area. World wide name. 448 Glossary...

This manual is also suitable for:

Storageworks xp20000 Storageworks xp24000

HP XP20000/XP24000 Manual

1 Remote Web Console for Storage System Messages and Error Codes

2 Support and Other Resources

Glossary

Quick Links

Error Codes

Related Manuals for HP XP20000/XP24000

Summary of Contents for HP XP20000/XP24000

Page 1: Error Codes

Page 3: Table Of Contents

Page 4: Remote Web Console For Storage System Messages And Error Codes

Page 5: Remote Web Console Error Codes

Page 444: Support And Other Resources

Page 445: Hp Websites

Page 446: Glossary

This manual is also suitable for:

Table of Contents