HP XP20000/XP24000 Manual page 182

Table 40 Error Codes — Part Code 4005 (continued)
Part Error
Code Number
4005 55265
4005 55530
4005 55531
4005 55532
4005 55533
4005 55534
4005 55535
4005 55536
4005 55537
4005 55538
4005 55539
182 Remote Web Console for Storage System Messages and Error Codes
Error Message
The parity group that contains
the volume(s) to which Cache
Residency is set cannot be
migrated to another CLPR.
Please remove the Cache
Residency settings from the
volumes, and then migrate
the parity group.
CLPR No:%s
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The specified extent is over
the size which can be
specified.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Cache Residency cannot be
set to the specified volume
because the IO Suppression
mode is set to Enable.
Cache Residency cannot be
set for this volume because
its Cache mode is set to
Disable.
Recommended Action
Check the settings, and then
retry the operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Set the extent area within the
size which can be specified,
and then retry the operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Disable the IO Suppression
mode of this volume, and
then retry the operation, or
remove the volume from the
volumes to be set.
Enable the Cache mode of
this volume, and then retry
the operation, or remove the
volume from the volumes to
be set.
Severity Failure
Level Level
E 6
E 2
E 2
E 6
E 2
E 2
E 2
E 2
E 2
E 2
E 2