HP XP20000/XP24000 Manual page 24

Table 3 Error Codes — Part Code 0003 (continued)
Part Error
Code Number
0003 1 104
0003 1 105
0003 1 1 10
0003 1 1 1 1
0003 1 1 13
0003 1 1 16
0003 1 123
24 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
An error occurred. If this
problem persists, please call
HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
The specified volume is
currently used by Parallel
Access Volume and is not
available for VLL operation.
An error occurred. If this
problem persists, call HP
technical support.
Command device security
cannot be set to the specified
volume because the volume
is not a command device.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
A nickname is not specified
when the configuration
change of LUN Manager is
requested. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
Change the volumes to create
CV by VLL operation, retry
the VLL setting.
You have not specified the
value when registering
WWN. Or zero is set as the
WWN value. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
The configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
Severity Failure
Level Level
E 2
E 2
E 2
E 2
E 6
E 2
E 6