HP XP20000/XP24000 Manual page 391

Table 65 Error Codes — Part Code 71 10 (continued)
Part Error Error Message
Code Number
71 10 65662 The data has been changed.
The settings will be discarded
if you continue the
processing. Do you want to
switch the LDKC?
71 10 65729 Pairs cannot be created any
more because XP Business
Copy Operation for
FICON(R) Data Migration is
already registered to the
specified volume.
71 10 66102 Information was updated by
other users. The list will scroll
to the top.
71 10 66560 The maximum number of
Pairs or Volumes that can be
displayed in the Preview List
is 16,384. Change the
number of pairs or volumes
being displayed in the
Preview List to 16,384 or
less.
71 10 69025 Some pairs are excluded
from the pairs to be set,
because pairs in invalid
status for Split Pair are
included in the specified
pairs.
Table 66 Error Codes — Part Code 8005
Part Error Error Message
Code Number
8005 2002 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
8005 2015 A connection error has
occurred.
8005 2145 A connection error has
occurred.
8005 3003 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
8005 5010 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
To continue processing, click
[OK]. Otherwise, click
[Cancel].
Delete XP Business Copy
Operation for FICON(R) Data
Migration that is already
registered, or select another
volume.
Click [OK], and then continue
the operation.
Change the number of the
Preview data to 16,384 or
less.
Change the status of the
excluded pair.
Recommended Action
If this problem persists, call
HP technical support.
Retry the same operation. If
the error occurs after retrying,
call HP technical support.
Retry the same operation. If
the error occurs after retrying,
call HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Remote Web Console Error Codes 391
Severity Failure
Level Level
W 5
W 0
W 0
W 0
i 5
Severity Failure
Level Level
E 2
E 3
E 3
E 2
E 2