HP XP20000/XP24000 Manual page 368

Table 63 Error Codes — Part Code 7010 (continued)
Part Error
Code Number
7010 9002
7010 9005
7010 9101
7010 9102
7010 9108
7010 9109
7010 91 10
7010 9303
7010 55003
7010 55004
7010 59000
7010 59048
7010 59069
368 Remote Web Console for Storage System Messages and Error Codes
Error Message
The request operation has
completed.
An error occurred. Check the
error code.
Do you want to cancel?
Do you want to apply?
The option has been
changed. If you continue
processing before applying
the change, the option will
be reset to the current setting.
Do you want to continue
processing?
Do you want to execute the
Set Over operation?
Do you want to execute the
Initialize operation?
There are no valid volumes.
The selected S-VOLs include
a volume or volumes that
is/are paired.
The number of selected
P-VOLs doesn't match the
number of selected S-VOLs.
Correct the number of
selected P-VOLs and S-VOLs.
The CLPR used for the P-VOL
differs from the CLPR used for
the S-VOL. Do you want to
continue this operation?
The P-VOL and the S-VOL
belong to different SLPRs. Do
you want to continue this
operation?
The P-VOL and the S-VOL
belong to different SLPRs. If
you perform this operation,
the storage partition
administrator will become
unable to operate.
Do you want to continue this
operation?
Recommended Action
The operation was ended
normally. Execute the next
operation.
An error occurred during the
indicated operation. See the
error code for each operation
in the Preview List.
To cancel, click [OK].
Click [OK] to execute the
operation.
To continue processing, click
[OK]. Otherwise, click
[Cancel].
To continue processing, click
[OK]. Otherwise, click
[Cancel].
To continue processing, click
[OK]. Otherwise, click
[Cancel].
Check the device emulation
and the definition of the SCSI
path.
Check the selected S-VOLs.
Correct the number of
selected P-VOLs and S-VOLs.
To continue the operation,
click [OK].
To continue the operation,
click [OK].
To continue the operation,
click [OK].
Severity Failure
Level Level
i 0
i 0
i 0
i 0
W 0
W 2
W 2
W 0
i 0
i 0
i 0
i 0
i 0