HP XP20000/XP24000 Manual page 335

Table 58 Error Codes — Part Code 6610 (continued)
Part Error Error Message
Code Number
6610 55039 You are specifying Group for
the range and trying to
manipulate the same mirror.
Select only one data volume
pair in the mirror when you
specify Group for the range.
6610 55202 The specified controller ID
cannot be used.
6610 55207 Some of the specified values
are incorrect. Two times the
value of M-JNL Cache plus
the value of R-JNL Cache must
be equal to or less than 100.
Or, the value of Threshold of
start Async JNL must be equal
to or less than the value of
Threshold of start Sync JNL.
6610 55208 The specified journal group
number is incorrect. Specify
the correct journal group
number.
6610 55229 You want to forcibly delete
pairs, but there are some
pairs where Group is not
specified as the range.
Specify Group as the range
when you want to forcibly
delete pairs.
6610 55644 [Warning]
There are some pairs where
Group is not specified as the
range in the pairs specified
to be deleted forcibly.
Other pairs in the same
group may suspend due to a
failure by this operation.
Are you sure you want to
delete pairs?
6610 56504 There is no journal group that
can be used as a master
journal group.
6610 56505 There are no secondary
subsystems available.
Register secondary
subsystems and then retry the
operation.
6610 56522 There are no consistency
groups available. Create
unused consistency groups
and then retry the operation.
6610 56523 No more mirrors can be
created for the specified
volume.
Recommended Action
Check the range setting. If
you specify Group, select
only one data volume pair in
the mirror.
Check the specified controller
ID.
The value of Threshold of start
Async JNL must equal or be
less than the Threshold of
start Sync JNL value.
Specify the correct journal
group number.
Specify normal deletion, or
specify Group as the range.
To delete pairs, click [Yes].
Otherwise, click [No].
Register a journal group.
Register secondary storage
systems, and then retry the
operation.
There are no consistency
groups available. Create
unused consistency groups,
and then retry the operation.
Check the mirrors of the
specified volume.
Remote Web Console Error Codes 335
Severity Failure
Level Level
i 0
W 0
W 0
W 0
W 0
W 0
W 0
i 0
i 0
i 0