HP XP20000/XP24000 Manual page 358

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 55264
7005 55301
7005 55645
7005 56301
7005 56302
7005 56303
7005 56524
7005 57101
7005 57102
7005 58000
358 Remote Web Console for Storage System Messages and Error Codes
Error Message
The command was rejected,
because you tried to create
a volume pair formed with a
volume to which VMA is set
by Data Retention Utility and
a volume without VMA.
You cannot create the pair,
because the licensed capacity
of Data Retention Utility is
insufficient.
Quick Restore cannot be
executed because the
specified pair is composed
of the external volumes with
different cache mode settings.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This function cannot be used
by the storage partition
administrator.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The command has been
rejected because the cascade
request for creating cascade
pairs composed of volumes
belonging to the same
consistency group was
issued.
Recommended Action
You cannot create a pair
using these volumes.
To create a pair by using a
volume without VMA, you
must only use volumes without
VMA. To create a pair by
using a volume with VMA,
you must only use volumes
with VMA.
Increase the licensed
capacity of Data Retention
Utility, and retry the
operation. When an SLPR is
allocated, check the licensed
capacity of the SLPR.
Use the Reverse Resync
option.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select a different volume or
release the consistency group
setting.
Severity Failure
Level Level
i 0
E 6
W 5
E 2
E 2
E 2
E 3
E 2
E 2
i 0