HP XP20000/XP24000 Manual page 393

Table 66 Error Codes — Part Code 8005 (continued)
Part Error Error Message
Code Number
8005 8001 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
8005 8100 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
8005 55021 The total of Cache Residency
Manager size of the CLPRs
and the total of all Cache
Residency Manager size in
the subsystem are not equal.
8005 55243 The total of Cache Residency
Manager capacity of the
CLPRs and the total of all
Cache Residency Manager
capacity in the subsystem are
not equal.
8005 55244 The Cache Residency
Manager size set for the
CLPR exceeds the maximum
available Cache Residency
Manager size.
CLPR No:%s
8005 55245 The number of Cache
Residency Manager areas set
for the CLPR exceeds the
maximum available number
of Cache Residency Manager
areas.
CLPR No:%s
8005 55246 The total number of Cache
Residency Manager areas set
for the CLPRs and the
maximum number of the
Cache Residency Manager
areas in the subsystem are
not equal.
8005 55247 The Cache Residency
Manager size set for the
CLPR is not a multiple of 512
MB.
CLPR No:%s
8005 55251 The mainframe volume is set
for the SLPRs other than SLPR
0.
CU:LDEV=%s:%s
Recommended Action
Retry the same operation
several times. If the same
error occurs, call HP technical
support.
Retry the same operation
several times. If the same
error occurs, call HP technical
support.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Check the settings, and then
retry the operation.
Remote Web Console Error Codes 393
Severity Failure
Level Level
E 6
E 6
E 6
E 6
E 6
E 6
E 6
E 6
E 6