HP XP20000/XP24000 Manual page 259

Table 52 Error Codes — Part Code 6010 (continued)
Part Error Error Message
Code Number
6010 9129 Recovered from the error that
occurred when copying
started.
6010 9154 As a result of this operation,
you will not be able to re-start
ERASE R-VOL operation. To
delete the pair forcibly, try
again with Force option.
6010 9155 The history file has been
updated. Select the OK
button to display the history
logs from the beginning.
6010 9300 WARNING: Destination
volume of specified volume
pair may contain some
inconsistency, because
volume copy is not completed
yet. Full volume initialization
is required before re-using it.
6010 9301 WARNING: Through this
operation, M-VOL status will
be changed to SMPL status
forcibly, but R-VOL status will
not be changed. If you do
this operation, change the
R-VOL status to SMPL later.
6010 9302 There are no RCP ports.
6010 9303 There are no valid volumes.
6010 9304 WARNING: Group or C/T
is specified for Delete Range.
Confirm all pairs in the group
are synchronized. If some
volumes are not
synchronized, full volume
initialization is required
before re-using them.
6010 9305 There are no initiator ports.
6010 9306 The XP Continuous Access
function is not installed in this
controller. You cannot create
pairs.
6010 9307 You specified the same
volumes more than once. The
duplicate occurrences were
excluded.
Recommended Action
Click [OK] to continue
processing.
Follow the instructions in the
message.
Click [OK].
Follow the instructions in the
message.
Follow the instructions in the
message.
Set the port to RCP before
registering RCU. Moreover,
set up the correct range of
CU numbers to which the RCP
port is applied.
Confirm whether the
command device for Business
Continuity Manager is
defined.
Follow the instructions in the
message.
Set the port to Initiator before
registering RCU.
There is no XP Continuous
Access license. Set the
license.
Because the same volume
where multiple paths are
defined was selected, the
overlapped one was
eliminated. Click [OK] and
continue.
Remote Web Console Error Codes 259
Severity Failure
Level Level
i 0
W 0
i 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0