HP XP20000/XP24000 Manual page 117

Table 26 Error Codes — Part Code 1005 (continued)
Part Error Error Message
Code Number
1005 65660 The XP Thin Provisioning
volume is not associated with
a pool. Associate the XP Thin
Provisioning and a pool first.
1005 65672 XP Thin Provisioning
volume(s) cannot be
combined into LUSE volumes.
1005 65704 The Thin Provisioning volumes
are not associated with the
same pool. Associate the XP
Thin Provisioning volumes
with the same pool first.
Table 27 Error Codes — Part Code 1010
Part Error Error Message
Code Number
1010 1023 The specified fibre address is
invalid.
1010 1065 The specified host group is
already used.
1010 5010 The specified LDEVs and free
LUNs should be the same
number.
1010 5040 The number of LU paths in
use has already reached the
maximum (2,048 in a Fibre
Channel environment).
1010 5041 The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per host
group (2,048 in a Fibre
Channel environment).
1010 5042 The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per port
(2,048 in a Fibre Channel
environment).
1010 5043 The selected number of LDEVs
exceeds the number of free
LUNs.
1010 5050 The specified LUN had been
set.
1010 5051 The selected LUN is not a
command device.
1010 5052 Select the LUN that is already
assigned.
Recommended Action
Associate the XP Thin
Provisioning volume with the
same pool, and then retry the
operation.
Select another volume.
Associate the XP Thin
Provisioning volumes with the
same pool, and then retry the
operation.
Recommended Action
Correct the specified content,
and issue the request again.
(Currently, Bad Value Send
report in Set Response.)
Correct the specified
contents, and request the
setting of the configuration
information again.
Correct the specified content,
and retry.
You cannot specify any more.
Reduce the number, and
retry.
Reduce the number, and
retry.
Reduce the number, and
retry.
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Remote Web Console Error Codes
Severity Failure
Level Level
E 6
E 6
E 6
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
E 3
W 5
1 17