HP XP20000/XP24000 Manual page 338

Table 58 Error Codes — Part Code 6610 (continued)
Part Error
Code Number
6610 59100
6610 59103
6610 59104
6610 59108
6610 591 1 1
6610 591 12
6610 591 13
338 Remote Web Console for Storage System Messages and Error Codes
Error Message
The same volume is stored
more than once in the
Preview list.
Use the sort function to
identify volumes with the
same LDKC number, the same
CU number and the same
LDEV number.
There is no volume that can
be registered or deleted.
The specified parity group
does not contain volumes that
can be registered or deleted
as journal volumes.
The master journal group
number for the specified data
volume exceeds 0x0F.
There are two or more CLPR
numbers for the specified
data volume. In this
operation, specify only one
CLPR number.
The CLPR number of the
specified data volume is
different from the CLPR
number of the data volume in
the Preview list. In this
operation, specify only one
CLPR number.
There are two or more CLPR
numbers for the specified
volume, or you tried to
register a volume different
from the CLPR number of an
existing volume. Two or more
CLPR numbers cannot exist in
one journal group.
Recommended Action
Use the sort function to
identify volumes with the
same LDKC number, the same
CU number and the same
LDEV number.
Create a volume that can be
used as a journal volume. To
do this, add a volume or use
some other way.
Specify another parity group.
Check the master journal
group number for the
specified data volume.
Change the journal group
number if you are performing
an Add Pair (Paircreate)
operation.
Delete the data volume from
the Preview list if you are
performing a Resume Pair
(Pairresync) operation.
Check the CLPR number for
the specified data volume,
and specify only one CLPR
number.
Specify only the volume that
has the same CLPR number
as the CLPR number of the
volume in the Preview list.
Check the CLPR number of
the specified volume, and
check the CLPR numbers of
any existing volumes. Be sure
the journal group has only
one CLPR number while
specifying a volume.
Severity Failure
Level Level
W 0
W 0
W 0
W 5
W 5
W 5
W 5