Remote Web Console Error Codes - HP XP20000/XP24000 Manual

cause is that some process is in progress at the server. This message does not indicate an
error.
Message text: Descriptive text that appears in the message window. It may include variables
%s (character string) and %d (numeral). The values of these variables are determined when
processing is performed.
Messages with a part code 60xx (where xx is a two-digit number) are Hitachi TrueCopy™
for Mainframe or XP Continuous Access Software messages. This manual contains Hitachi
TrueCopy for Mainframe messages only. If you are an XP Continuous Access user, note that:
◦ The word M-VOL in Hitachi TrueCopy for Mainframe messages is equivalent to P-VOL in
XP Continuous Access messages.
◦ The word R-VOL in Hitachi TrueCopy for Mainframe messages is equivalent to S-VOL in
XP Continuous Access messages.
Part code: The ID of the application that issued the message. In
code is 1 10.
Message number: Decimal number within the range of 0000 to 99999. In
4) the message number is 9102.
If Remote Web Console starts and displays the following message, see the code and number the
(YYYY ZZZZZ) represents. A check box may be indicated in the message window. If you check
the check box, the message will not be displayed until you log in again.
A network error occurred, the server is not ready, or an error occurred
in the server. (YYYY ZZZZZ)

Remote Web Console Error Codes

To find solutions to the Remote Web Console for storage system errors, see
through Table 90 (page 442)
products causing the errors.
The tables list the error codes and error messages for Remote Web Console and provide
recommended action for the error conditions.
In some cases, the Recommended Action column may be blank. In these circumstances, you should
take actions based on instructions provided in the error message and based on what the you are
trying to accomplish. The tables also provide the severity level and failure level of the error
conditions.
Severity Levels. The severity levels for the error codes are:
i: Information
E: Error
W: Warning
N: The server is unable to accept the request from Remote Web Console. One possible cause
is that some process is in progress at the server. This message does not indicate an error.
Fatal error
The server is unable to accept the request from Remote Web Console. One possible
or the Troubleshooting chapter in the user guides for the program
Figure 1 (page 4)
Figure 1 (page
Table 1 (page 6)
Remote Web Console Error Codes
the part
5