HP XP20000/XP24000 Manual page 355

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 8623 The command has been
rejected because the
specified volume is used as
S-VOL of XP Continuous
Access pair or XP External
Storage Access Manager
pair.
7005 8624 The command has been
rejected, because there is no
pair available.
7005 8625 The P-VOL(S-VOL) and
S-VOL(T-VOL) have the same
number.
7005 8626 The SMPL command was
rejected, because the
high-speed Split was in
progress.
7005 8627 The Pairresync operation has
been rejected, because pair
status is COPY(SP).
7005 8628 The operation of the L1 pair
failed because the L2 pair
was in COPY(SP) status or
PSUS(SP) status.
7005 8629 The status mode specification
is invalid.
7005 8630 The status mode type is
invalid.
7005 8631 The specified CU number is
invalid.
7005 8632 The timing of issuing the
command is invalid.
7005 8633 The abnormal status is
invalid.
7005 8634 The volume specified as a
reserved volume is already
defined as a reserved volume
for Auto LUN.
7005 8635 The specified P-VOL is
defined as a reserved volume
for Auto LUN.
7005 8636 The specified S-VOL is
defined as a reserved volume
for Auto LUN.
7005 8637 The specified P-VOL is used
as a source volume for Auto
LUN.
Recommended Action
The S-VOL of XP Continuous
Access pair or XP External
Storage Access Manager
pair cannot be used as a
reserved volume. Specify
another volume.
Confirm whether the volumes
specified for P-VOL and
S-VOL are correct.
Check the specified volume
number.
After the high-speed Split is
completed, retry the
operation.
Wait until the status of the
pair changes to PSUS.
Wait until the L2 pair status
changes to PSUS, and then
retry the operation.
Check the contents, and retry.
Check the contents, and retry.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Specify other volumes, or
release the XP Auto LUN
Setting.
Specify other volumes, or
release the XP Auto LUN
Setting.
Specify other volumes, or
release the XP Auto LUN
Setting.
Specify other volumes, or
release the XP Auto LUN
setting.
Remote Web Console Error Codes 355
Severity Failure
Level Level
W 5
W 5
i 0
i 0
i 0
i 0
i 0
i 0
i 0
E 0
E 0
i 0
i 0
i 0
i 0