HP XP20000/XP24000 Manual page 41

Table 7 Error Codes — Part Code 0007 (continued)
Part Error Error Message
Code Number
0007 5306 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0007 5307 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0007 5308 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0007 5309 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0007 6012 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0007 6022 File access error occurred.
If a file is transferred between
SVP and client PC, confirm
that the file name does not
contain invalid characters.
In other cases, wait for a
while and retry the operation.
0007 6023 File access error occurred.
If a file is transferred between
SVP and client PC, confirm
that the file name does not
contain invalid characters.
In other cases, wait for a
while and retry the operation.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If a file is transferred between
the SVP and client PC,
confirm that the file name
does not contain invalid
characters.
The characters that can be
used for file names are single-
byte alphanumeric characters
and symbols (ASCII character
set), however the following
characters cannot be used for
file names: " \ ; : * ? < > |
/ ,
In other cases, wait for a
while and retry the operation.
If the same problem persists
despite retrying, call HP
technical support.
If a file is transferred between
the SVP and client PC,
confirm that the file name
does not contain any invalid
characters.
The characters that can be
used for file names are single
byte alphanumeric characters
and symbols (ASCII character
set), however the following
characters cannot be used for
file names: " \ ; : * ? < > |
/ ,
In other cases, wait for a
while and retry the operation.
If the same problem persists
despite retrying, call HP
technical support.
Remote Web Console Error Codes
Severity Failure
Level Level
E 2
E 2
E 2
E 2
E 2
E 5
E 5
41