HP XP20000/XP24000 Manual page 115

Table 26 Error Codes — Part Code 1005 (continued)
Part Error Error Message
Code Number
1005 6040 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 6050 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 7060 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 8001 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
1005 8100 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
1005 8102 This function is not supported.
1005 55206 The configuration information
being set does not match the
current configuration
information. Check the
settings, and then retry the
operation.
1005 55500 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 55553 The specified port is not a
fibre port.
1005 55554 The specified WWN is not
registered.
1005 55555 The value of the WWN is not
specified or is set to zero.
1005 55561 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 55566 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
1005 55569 The specified Group-ID is
already registered.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Retry the same operation
several times. If the same
error occurs, call HP technical
support.
If this problem persists, call
HP technical support.
Retry the same operation
several times. If the same
error occurs, call HP technical
support.
Check the settings, and then
retry the operation.
If this problem persists, call
HP technical support.
Check the setting.
Check the setting.
Check the setting.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Check the setting.
Remote Web Console Error Codes
Severity Failure
Level Level
E 2
E 2
E 2
E 6
E 6
E 6
E 6
E 2
E 6
E 6
E 6
E 2
E 2
E 6
1 15