HP XP20000/XP24000 Manual page 353

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 8597 The command has been
rejected, because the number
of pairs created with the
specified P-VOL has reached
the maximum.
7005 8598 The specified volume is not a
P-VOL.
7005 8599 The specified volume is
already a P-VOL.
7005 8600 The RAID level of the
specified volume is not
supported.
7005 8601 The specified P-VOL cannot
be paired with a backup
server volume.
7005 8602 The command has been
rejected, because the
specified P-VOL has already
been used as an S-VOL of the
other pair.
7005 8605 The Pairresync command was
issued to a device in the
SMPL status.
7005 8606 The operation to create L2
pair has been rejected
because the P-VOL of L1 pair
is used as P-VOL of XP
Continuous Access pair or XP
External Storage Access
Manager pair.
7005 8607 The command has been
rejected because the
specified S-VOL is used as
P-VOL of XP Continuous
Access pair or XP External
Storage Access Manager
pair.
Recommended Action
Pairs cannot be created with
the specified P-VOL any
more. See the Create Pair
Operation section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the composition of pairs.
Check the volume status.
Specify other P-VOL, and
retry the operation. Or delete
the pair of the specified
volume, and then retry the
operation.
Check the RAID level, and
specify a volume of the
supported RAID level, and
then retry the operation.
Check the contents, and retry.
The volume used as an S-VOL
of the other pair cannot be
used as a P-VOL.
Check the pair status.
When the P-VOL of L1 pair is
used as P-VOL of XP
Continuous Access pair or XP
External Storage Access
Manager pair, L2 pair cannot
be created.
The requested command
cannot be executed in the
current status of XP
Continuous Access pair or XP
External Storage Access
Manager pair.
See the section about the
sharing XP Business Copy
volumes in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User Guide
for the relation between the
state of XP Continuous Access
pair or XP External Storage
Access Manager pair and the
XP Business Copy operations.
Remote Web Console Error Codes 353
Severity Failure
Level Level
W 5
i 0
i 0
i 0
i 0
W 5
i 0
W 5
W 5