HP XP20000/XP24000 Manual page 301

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 58690 The recovery to the status
ready for Delta resync failed,
because the status of the
specified primary data
volume was one of the
following:
The primary data volume
is being copied;
correction copy or drive
copy is in progress.
The primary data volume
is in correction access
status.
The primary data volume
is blocked
The primary data volume
is being maintained.
The access attribute of the
primary data volume is
Read Only.
6505 58691 The specified mirror ID is
already used in the restore
journal group. Specify
another mirror ID.
6505 58692 The specified master journal
group cannot be used for
Delta resync because the
specified master journal
group is registered in the
extended consistency group
(EXCTG).
6505 58693 The specified restore journal
group cannot be used for
Delta resync because the
specified restore journal
group is registered in the
extended consistency group
(EXCTG).
6505 58694 The Delta resync operation
failed. Check the status of the
secondary data volume, or
the status of the connected
communication line.
6505 58695 No more journal groups can
be allocated to the specified
command device. Delete the
journal groups registered to
the extended consistency
group (EXCTG), and then
retry the operation with
another command device.
Recommended Action
Check the status on the
primary data volume.
Specify another mirror ID.
Check the status of the master
journal group.
Check the status of the restore
journal group.
Check the status of the
secondary data volume, or
the status of the connected
communication line. When
no abnormality is found in the
status of the secondary data
volume or the communication
line, call HP technical
support.
Delete the journal groups
registered to the extended
consistency group (EXCTG),
and then retry the operation
with another command
device.
Remote Web Console Error Codes 301
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0