HP XP20000/XP24000 Manual page 333

Table 58 Error Codes — Part Code 6610 (continued)
Part Error Error Message
Code Number
6610 9104 Do you want to change the
mode?
6610 9105 The value that is under setup
is not reflected yet. Do you
want to exit?
6610 9106 The value that is under setup
is not reflected yet. Do you
want to change the mode?
6610 9107 The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
6610 91 1 1 Do you want to delete the
specified line of settings from
the Preview list?
6610 91 12 Do you want to continue this
operation?
6610 91 13 Are you sure you want to
clear SIMs of XP Continuous
Access Journal and Universal
Replicator for Mainframe?
6610 91 15 The monitoring was stopped
by another operator. The
graph will be closed.
6610 91 16 Another operator has
changed the Gathering
Interval value. The graph will
be closed.
6610 91 17 Are you sure you want to
close the graph?
6610 91 18 Check the specified value.
6610 91 19 No graph item has been
selected. Select a graph item.
6610 9120 The graph will be closed if
you execute the processing.
Do you want to execute the
processing?
6610 9121 Data has been changed and
the graph has been
displayed. If you continue this
operation, all the data and
the graph will become
invalid. Are you sure you
want to continue this
operation?
Recommended Action
To apply settings in the
Preview list to the disk
storage system, click [OK].
To discard the current settings
and close the window, click
[OK]. Otherwise, click
[Cancel].
To discard the current settings
and switch to View mode,
click [OK]. Otherwise, click
[Cancel].
To discard the current settings
and refresh the window, click
[OK]. Otherwise, click
[Cancel].
To discard the current
settings, click [OK].
Otherwise, click [Cancel].
To continue the current
operation, click [OK].
Otherwise, click [Cancel].
To clear SIMs, click [Yes].
Otherwise, click [No].
Click [OK].
Click [OK].
To close the graph, click
[OK]. Otherwise, click
[Cancel].
To apply this setting, click
[OK]. To change the setting,
click [Cancel].
Select a graph item.
To execute the processing
and close the graph, click
[OK]. Otherwise, click
[Cancel].
To execute this operation,
click [OK]. Otherwise, click
[Cancel].
Remote Web Console Error Codes 333
Severity Failure
Level Level
i 0
i 0
i 0
i 0
W 0
i 0
W 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0