HP XP20000/XP24000 Manual page 65

Table 14 Error Codes — Part Code 0305 (continued)
Part Error Error Message
Code Number
0305 7209 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0305 7210 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0305 56524 This function cannot be used
by the storage partition
administrator.
0305 56525 Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
0305 56526 The resources of other SLPR(s)
cannot be accessed.
0305 65685 0 cannot be specified in all
the fields.
0305 65686 The SVP OS does not support
IPv6.
Table 15 Error Codes — Part Code 0310
Part Error Error Message
Code Number
0310 5010 Specify 0 or above but below
256 in each field.
0310 501 1 0 cannot be specified in all
the fields or the Class A field.
0310 5040 The maximum number of IP
Address is 32.
0310 5041 The maximum number of
Community name is 32.
0310 5050 This Community name is
already in use.
0310 5051 This IP address is already in
use.
0310 9060 This item will be deleted. Do
you want to continue?
0310 65684 Specify a value between 0 to
FFFF in each field.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
Correct the settings, and then
retry the operation.
Correct the settings, and then
retry the operation.
Recommended Action
Correct the specified content,
and retry.
Correct the specified content,
and retry the operation.
Reduce the number, and
retry.
Reduce the number, and
retry.
Check the content of the
operation.
Check the content of the
operation.
Correct the settings, and then
retry the operation.
Remote Web Console Error Codes
Severity Failure
Level Level
E 2
E 2
E 3
E 3
E 6
W 5
W 5
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
65