HP XP20000/XP24000 Manual page 344

Table 59 Error Codes — Part Code 6805 (continued)
Part Error
Code Number
6805 55219
6805 55220
6805 55221
6805 56524
Table 60 Error Codes — Part Code 6810
Part Error
Code Number
6810 5122
6810 7440
6810 9101
6810 9102
6810 9106
6810 9107
6810 91 1 1
6810 55212
6810 55214
344 Remote Web Console for Storage System Messages and Error Codes
Error Message
The Sleep Time setting is
incorrect.
The SLPR number is
duplicated.
The CLPR number is
duplicated.
This function cannot be used
by the storage partition
administrator.
Error Message
No data has been changed.
An error occurred during
processing. If this problem
persists, call HP technical
support.
Do you want to cancel?
Do you want to apply?
The value that is under setup
is not reflected yet. Do you
want to change the mode?
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
Do you want to delete the
specified line of settings from
the Preview list?
The options Block Option and
Donot Block (Volume Level)
cannot be specified at the
same time.
The Level 2 Threshold setting
is incorrect.
Recommended Action
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
Recommended Action
The operation has been
rejected because there is no
data to set. Click [OK], and
then go on to the next
operation.
If this problem persists, call
HP technical support.
To cancel the operation, click
[OK].
To execute the operation in
Preview, click [OK].
To change the mode, click
[OK]. To not change the
mode, click [Cancel].
To continue processing, click
[OK]. To stop processing,
click [Cancel].
To delete the specified line of
settings from the Preview list,
click [OK]. Otherwise, click
[Cancel].
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Severity Failure
Level Level
W 5
E 5
W 5
E 3
Severity Failure
Level Level
W 0
E 2
i 0
i 0
i 0
i 0
W 0
i 0
i 0