HP XP20000/XP24000 Manual page 279

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 58070 Invalid parameter (Suspend
Condition-Master Journal
Failure).
6505 58071 Invalid parameter (Suspend
Condition-Restore Journal
Failure).
6505 58072 The pair status has not
changed yet. Check the
configuration of the
subsystems and the status of
lines connecting the
subsystems, and then check
whether the status of the XP
Continuous Access pair is
changed.
6505 58073 The subsystem is busy. Wait
for a while, and then retry the
operation.
6505 58075 The specified serial number
is incorrect.
6505 58078 The specified volume does
not exist or is unusable.
6505 58079 The specified primary data
volume cannot be used as an
S-VOL (secondary volume)
because of Volume Retention
Manager settings or Data
Retention Utility settings.
6505 58080 A Concurrent Copy operation
is in progress on the specified
primary data volume.
6505 58081 The specified primary data
volume belongs to an access
group or a pool group of
Volume Security.
6505 58082 The specified consistency
group is being used. Confirm
the status of consistency
group in the TrueCopy
Asynchronous for Mainframe,
XP Continuous Access
Asynchronous, or XP
Continuous Access Journal
screen of the local and
remote storage systems.
6505 58083 The specified primary journal
group is not registered.
Recommended Action
Check the specified Suspend
Condition parameter.
Check the specified Suspend
Condition parameter.
The current configuration of
the storage systems and the
current status of lines
connecting the storage
systems may not satisfy the
operating conditions. Check
the configuration of the
storage systems and the
status of lines connecting the
storage systems, and then
check whether the status of
the XP Continuous Access
pair is changed.
If the error occurs after
retrying, call HP technical
support.
Check the specified serial
number.
Check the status of the
specified volume.
Check the status of the
specified primary data
volume in the Volume
Retention Manager window
or the Data Retention Utility
window.
Check the status of the
specified primary data
volume.
Check the status of the
specified volume in the
Volume Security window.
Confirm the status of
consistency group in the
TrueCopy Asynchronous for
Mainframe, XP Continuous
Access Asynchronous, or XP
Continuous Access Journal
window of the local and
remote storage systems.
Check the status of the
specified primary journal
group.
Remote Web Console Error Codes 279
Severity Failure
Level Level
i 0
i 0
W 4
W 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0