HP XP20000/XP24000 Manual page 315

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 68850 The operation failed, because
the consistency (CT) group of
specified data volume was
being shared with multiple
primary and secondary
storage systems, and LU was
specified for the [Range].
6505 68851 The operation failed, because
the specified consistency (CT)
group was shared with
multiple primary and
secondary storage systems.
6505 68852 The operation failed, because
the specified consistency (CT)
group or the secondary data
volume was being shared
with multiple primary and
secondary storage systems.
This CT group or the
secondary data volume
cannot be used for Delta
resync.
6505 68853 The operation failed, because
the specified journal group
was shared with multiple
primary and secondary
storage systems.
6505 68857 The operation failed, because
a remote command device
has already been assigned
to the specified mirror.
6505 68858 The operation failed, because
the specified mirror was
invalid.
6505 68859 The operation failed, because
the specified remote
command device was
blocked.
6505 68860 The operation failed, because
the serial numbers between
the remote command device
and the mirror did not match.
6505 68861 The operation failed, because
the specified journal group
was not in the configuration
of 3DC cascade or 3DC multi
target.
6505 68862 The specified remote
command device cannot be
assigned to a mirror any
further.
Recommended Action
Specify Group for the
[Range], and then retry the
operation.
Specify another CT group,
and then retry the operation.
Check whether the specified
CT group or the secondary
data volume was shared with
multiple primary and
secondary storage systems or
not.
Specify another journal
group, and then retry the
operation.
Confirm whether a remote
command device is assigned
to the specified mirror.
Confirm the status of the
specified mirror.
Confirm the status of the
specified remote command
device.
Confirm whether the serial
number of the external
volume that is used as a
remote command device
matches the one of the
storage system connected to
the mirror.
Confirm the status of the
specified journal group.
Specify another remote
command device, and then
retry the operation.
Remote Web Console Error Codes
Severity Failure
Level Level
W 0
W 0
E 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
315