HP XP20000/XP24000 Manual page 356

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 8638
7005 8639
7005 8640
7005 8641
7005 8642
7005 8643
7005 8644
7005 8645
7005 8646
356 Remote Web Console for Storage System Messages and Error Codes
Error Message
The command has been
rejected, because the
specified P-VOL is set for use
in Cache Residency
Manager.
The command has been
rejected, because the
specified S-VOL is set for use
in Cache Residency
Manager.
The command has been
rejected, because the pair
sharing the P-VOL was in the
Reverse Copy or Quick
Restore status.
The L1 pairs contain a pair
in the Reverse Copy or Quick
Restore status.
The command has been
rejected, because the
specified S-VOL is shared as
the P-VOL of the other pair
and the pair is in the
COPY(RS-R) status.
The Pairresync operation has
been rejected, because the
specified pair is not in the
state of PSUS.
The command has been
rejected, because the pair
status is not PSUS or PSUE.
The Reverse Copy command
has been rejected, because
the P-VOL is shared as the
S-VOL of a XP Continuous
Access pair.
The Reverse Copy request
was rejected, because the
P-VOL was shared with a XP
Continuous Access pair in the
non-suspend status.
Recommended Action
You cannot execute the
specified operation. Release
the Cache Residency
Manager setting for the
operation.
You cannot execute the
specified operation. Release
the Cache Residency
Manager setting for the
operation.
Wait until Reverse Copy or
Quick Restore completes.
Wait until Reverse Copy or
Quick Restore completes.
Wait until the status of the
pair sharing the P-VOL
becomes PAIR, and then retry
the operation. See the
Resynchronize Pair
Operations section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the status of pairs and XP
Business Copy operations.
The Pairresync operation
cannot be executed in the
current pair status. See the
Creating Pairs and
Resynchronize Pair
Operations sections in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the state of pairs and the XP
Business Copy operations.
Check the pair status.
You cannot execute the
specified operation. Release
the XP Continuous Access
pair for the operation.
Delete the XP Continuous
Access pair.
Severity Failure
Level Level
i 0
i 0
i 0
i 0
W 5
W 5
W 5
i 0
i 0