HP XP20000/XP24000 Manual page 390

Table 65 Error Codes — Part Code 71 10 (continued)
Part Error
Code Number
71 10 9108
71 10 9109
71 10 91 10
71 10 9377
71 10 9378
71 10 55003
71 10 55004
71 10 55597
71 10 58619
71 10 59000
71 10 59048
71 10 59069
390 Remote Web Console for Storage System Messages and Error Codes
Error Message
The option has been
changed. If you continue
processing before applying
the change, the option will
be reset to the current setting.
Do you want to continue
processing?
Do you want to execute the
Set Over operation?
Do you want to execute the
Initialize operation?
Do you want to enable the
setting to expand the number
of relationships?
Do you want to disable the
setting to expand the number
of relationships?
The selected T-VOLs include
a volume or volumes that
is/are paired.
The number of selected
S-VOLs doesn't match the
number of selected T-VOLs.
Correct the number of
selected S-VOLs and T-VOLs.
The entered values are
incorrect. Check the values
and then enter correct values.
The operation cannot be
executed because an invalid
value is contained in the
obtained information. Refresh
the window and then retry the
operation.
The CLPR used for the S-VOL
differs from the CLPR used for
the T-VOL. Do you want to
continue this operation?
The S-VOL and the T-VOL
belong to different SLPRs. Do
you want to continue this
operation?
The S-VOL and the T-VOL
belong to different SLPRs. If
you perform this operation,
the storage partition
administrator will become
unable to operate.
Do you want to continue this
operation?
Recommended Action
To continue processing, click
[OK]. Otherwise, click
[Cancel].
To continue processing, click
[OK]. Otherwise, click
[Cancel].
To continue processing, click
[OK]. Otherwise, click
[Cancel].
To continue processing, click
[OK]. To stop processing,
click [Cancel].
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Check the selected T-VOLs.
Correct the number of
selected S-VOLs and T-VOLs.
Check the values, and then
enter correct values.
Refresh the window, and then
retry the operation.
To continue the operation,
click [OK].
To continue the operation,
click [OK].
To continue the operation,
click [OK].
Severity Failure
Level Level
W 0
W 2
W 2
i 0
i 0
i 0
i 0
W 5
E 5
i 0
i 0
i 0