HP XP20000/XP24000 Manual page 436

Table 87 Error Codes — Part Code 9605
Part Error
Code Number
9605 5013
9605 5030
9605 5041
9605 551 1
9605 5809
9605 6012
9605 6023
9605 6038
9605 6502
9605 6533
9605 7060
9605 71 1 1
9605 7310
9605 8001
9605 8002
9605 8102
436 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
No commands are issued.
The number of issued
commands exceeds the
maximum.
The program product is not
installed.
The number of requests for
combining LUs does not
match the number of the LUs.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The mistake is found in the
set parameter.
Processing in progress. Wait
for a while, and then retry the
operation.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This error code is not
registered.
An error occurred while
connecting to the subsystem.
Retry a little later.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
This function is not supported.
Recommended Action
If this problem persists, call
HP technical support.
Issue a command again.
Decrease the number of
commands.
Install Program Product.
Review LUs, and retry the
operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Wait a few minutes, and then
retry the operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Retry a little later.
Retry a little later.
Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
Severity Failure
Level Level
E 2
E 5
W 5
W 5
E 3
E 3
E 3
E 2
W 5
E 3
E 2
E 3
E 5
E 3
E 3
E 3