HP XP20000/XP24000 Manual page 283

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 58270 The Add Pair (Paircreate)
operation failed because of
either of the following
reasons.
The specified restore
journal group has already
been paired with another
master journal group.
The combination of the
restore journal group and
the mirror ID specified
when creating Delta
resync volume pairs has
already been used by the
ordinary (not Delta resync)
volume pairs.
6505 58271 The specified secondary data
volume cannot be used
because of the following
reasons:
S-VOL Disable is set by
Data Retention Utility.
The VMA setting differs
between the primary data
volume and the secondary
data volume.
Protection is set by Volume
Retention Manager.
6505 58272 A Concurrent Copy operation
is in progress on the specified
secondary data volume.
6505 58273 Either of the following settings
is set to the specified
secondary data volume by
the Volume Security function.
The volume belongs to the
access group or the pool
group.
The setting does not allow
the volume to be used as
a secondary data volume.
6505 58275 The specified restore journal
group is not registered.
6505 58276 The specified secondary data
volumes cannot be paired
with another volume, because
the secondary data volume is
used as a journal volume.
Recommended Action
Check the mirror status and
the mirror ID of the specified
restore journal group.
Check the following items on
the Data Retention Utility
window if the specified
secondary data volume is an
open-system volume.
Whether S-VOL Disable is
set to the specified
secondary data volume.
Whether the VMA setting
differs between the
primary data volume and
the secondary data
volume.
Check whether the Protection
attribute is set on the Volume
Retention Manager window
if the specified secondary
data volume is a mainframe
volume.
Check the status of the
specified secondary data
volume.
Use Volume Security to check
the status of the specified
secondary data volume.
Check the specified restore
journal group.
Check the status of the
specified secondary data
volume.
Remote Web Console Error Codes 283
Severity Failure
Level Level
W 0
i 0
i 0
i 0
i 0
i 0