HP XP20000/XP24000 Manual page 343

Table 59 Error Codes — Part Code 6805 (continued)
Part Error Error Message
Code Number
6805 8659 Install necessary PCBs.
6805 55009 An invalid cache resource
number (CLPR No.) was
detected.
6805 55010 An invalid storage resource
number (SLPR No.) was
detected.
6805 55209 The maximum number of
CLPRs that can be created
was exceeded.
6805 55210 The Block Option setting is
incorrect.
6805 5521 1 The Donot Block (Volume
Level) option setting is
incorrect.
6805 55212 The options Block Option and
Donot Block (Volume Level)
cannot be specified at the
same time.
6805 55213 The Level 1 Threshold setting
is incorrect.
6805 55214 The Level 2 Threshold setting
is incorrect.
6805 55215 The Level 1 SIM setting is
incorrect.
6805 55216 The Level 2 Suspend setting
is incorrect.
6805 55217 The maximum number of
SLPRs that can be set was
exceeded.
6805 55218 The Level 1 Sleep setting is
incorrect.
Recommended Action
Install necessary PCBs.
Correct the cache resource
number (CLPR No.), and then
retry the operation. If this
problem persists, call HP
technical support.
Correct the storage resource
number (SLPR No.), and then
retry the operation. If this
problem persists, call HP
technical support.
Specify the number of CLPRs
within the valid range.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Specify the number of SLPRs
within the valid range.
Correct the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
Remote Web Console Error Codes 343
Severity Failure
Level Level
E 3
E 3
E 3
E 3
W 5
W 5
W 5
W 5
W 5
W 5
W 5
E 5
W 5