HP XP20000/XP24000 Manual page 442

Table 88 Error Codes — Part Code 9610 (continued)
Part Error
Code Number
9610 58405
9610 59106
Table 89 Error Codes — Part Code 10010
Part Error
Code Number
10010 5501 1
10010 55638
10010 55639
10010 55640
10010 55641
10010 55642
10010 59337
10010 59338
10010 59339
10010 65683
Table 90 Error Codes — Part Code 101 10
Part Error
Code Number
101 10 65718
101 10 65719
442 Remote Web Console for Storage System Messages and Error Codes
Error Message
There is an invalid value in
the Extent information.
If you set VMA, all the data
or part of the data written in
the logical volume will be
deleted. Do you want to
continue the operation?
Error Message
0 cannot be specified in all
the fields or the Class A field.
The same IP address, user ID
and output folder are set to
the primary FTP server and
the secondary FTP server.
Enter the user ID.
The server is not set. Input
and apply the required
setting, and retry the
operation.
The current setting is not
applied. Apply the setting,
and then retry the operation.
The path to the output folder
is invalid. (The first character
of the path to the output
folder shall be /.)
Do you want to transfer the
Audit Log to the FTP server
immediately?
Completed the transfer to the
FTP server.
Are you sure you want to
perform the complete
operation of all SIMs related
to the FTP transfer of Audit
Log?
0 cannot be specified in all
the fields.
Error Message
Enter a password.
[Password] does not match
the re-entered [Re-enter
Password].
Recommended Action
If this problem persists, call
HP technical support.
To set VMA, click [OK].
Otherwise, click [Cancel].
Recommended Action
Reply to the message.
Reply to the message.
Reply to the message.
Reply to the message.
Reply to the message.
Reply to the message.
To transfer the Audit Log to
the FTP server, click [OK].
Otherwise, click [Cancel].
Reply to the message.
To perform the complete
operation, click [OK].
Otherwise, click [Cancel].
Reply to the message.
Recommended Action
Enter a password.
Specify a valid password.
Severity Failure
Level Level
E 3
W 0
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
i 5
i 5
W 5
i 5
W 5
Severity Failure
Level Level
W 5
W 5