HP XP20000/XP24000 Manual page 129

Table 32 Error Codes — Part Code 2005 (continued)
Part Error Error Message
Code Number
2005 1028 The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
2005 1050 The following volumes cannot
be specified when you
change the expanded LU
configurations:
Volumes that do not exist
Volumes reserved by Auto
LUN
System Disk volume
2005 1 126 The LUSE operation cannot
be performed because the
volume is set as a command
device.
2005 1 137 Failed to form a LUSE volume
because the number of LUSE
volumes exceeds the
maximum that can be set in
a disk array subsystem.
2005 1 138 The specified LDEV is already
used for another LUSE
volume.
2005 1 182 The capacity of LUSE volume
exceeds the maximum.
2005 1 185 You are trying to insert in the
linkage operation including
LUSE. (LDEV number is
inserted to the LDEV numbers
created in LUSE).
2005 1 187 You cannot expand the LU
because the host mode of the
group with paths which are
defined in the LU is
corresponding to online
LUSE.
2005 1 196 The LUs cannot be combined
or released by mixing the
internal and external LUs.
2005 1362 The LUSE volume cannot be
configured because the
external volumes do not have
the same cache mode.
Recommended Action
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
Check the settings, and then
retry the operation.
Correct the specified
contents, and then retry the
operation.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
Check the specified contents.
Check the setting.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
Correct the specified content,
and then retry the operation.
Check the attributes of the
external volumes, and then
retry the operation.
Remote Web Console Error Codes 129
Severity Failure
Level Level
E 6
E 6
E 6
E 6
E 6
E 2
E 6
E 6
E 6
E 6