HP XP20000/XP24000 Manual page 215

Table 47 Error Codes — Part Code 5305 (continued)
Part Error Error Message
Code Number
5305 58574 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
5305 58575 An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
5305 58576 A communication time-out
error occurred in the storage
system. Wait for a while, and
then retry the operation.
Table 48 Error Codes — Part Code 5307
Part Error Error Message
Code Number
5307 5102 The specified Performance
Control group is not
registered.
5307 5128 The number of the
Performance Control groups
exceeds the maximum
number that can be
registered.
Recommended Action
The error may be caused by
a temporary communication
failure. Reboot the SVP or
click [Refresh All] on the File
menu of Remove Web
Console and refresh the
configuration information to
recover from the error.
If this problem persists, call
HP technical support.
The error may be caused by
a temporary communication
failure. Reboot the SVP or
click [Refresh All] on the File
menu of Remote Web
Console and refresh the
configuration information to
recover from the error.
If this problem persists, call
HP technical support.
The error may be caused by
a temporary communication
failure. Reboot the SVP or
click [Refresh All] on the File
menu of Remote Web
Console and refresh the
configuration information to
recover from the error.
If this problem persists, call
HP technical support.
Recommended Action
Check the specified content,
and retry.
Check the specified content,
and retry.
Remote Web Console Error Codes
Severity Failure
Level Level
E 6
E 6
E 3
Severity Failure
Level Level
W 6
i 6
215