HP XP20000/XP24000 Manual page 420

Table 74 Error Codes — Part Code 8505 (continued)
Part Error
Code Number
8505 58316
8505 58317
8505 58318
8505 58323
8505 58339
Table 75 Error Codes — Part Code 8507
Part Error
Code Number
8507 6012
8507 7070
8507 7071
420 Remote Web Console for Storage System Messages and Error Codes
Error Message
Parity groups in CLPR are
being migrated in the storage
system. Wait for a while, and
then retry the operation.
CLPR capacity is being
changed in the storage
system. Wait for a while, and
then retry the operation.
An error occurred on the
DKC, while obtaining
information about the
progress of the CLPR process.
If this problem persists, call
HP technical support.
The CLPR that the parity
groups belong to cannot be
changed because the
specified parity groups
include only a part of the XP
Continuous Access
Asynchronous or TrueCopy
Asynchronous for Mainframe
pair volumes in a CT group.
Specify the parity group so
that all the pair volumes in CT
group are contained.
The CLPR which the parity
groups belong to cannot be
changed because the
specified parity groups do
not include all the journal
volumes in a journal group of
XP Continuous Access Journal
and Universal Replicator for
Mainframe. Make sure to
specify the parity groups that
contain all the journal
volumes in the journal group.
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
Wait a few seconds, and
then retry the operation.
Wait a few seconds, and
then retry the operation.
If this problem persists, call
HP technical support.
Specify the parity group so
that the pair volumes of XP
Continuous Access
Asynchronous or TrueCopy
Asynchronous for Mainframe
are not contained or all pair
volumes in consistency group
are contained.
Specify the parity groups that
do not contain any journal
volumes of XP Continuous
Access Journal and Universal
Replicator for Mainframe, or
specify the parity groups that
contain all the journal
volumes in the journal group.
Recommended Action
If the same problem persists
despite retrying, call HP
technical support.
If the same problem persists
despite retrying, call HP
technical support.
If the same problem persists
despite retrying, call HP
technical support.
Severity Failure
Level Level
W 5
W 5
E 3
i 5
i 5
Severity Failure
Level Level
E 2
E 2
E 2