HP XP20000/XP24000 Manual page 424

Table 77 Error Codes — Part Code 8605 (continued)
Part Error
Code Number
8605 66822
8605 66823
Table 78 Error Codes — Part Code 8610
Part Error
Code Number
8610 65758
8610 65759
8610 65760
8610 65761
8610 65762
8610 65763
424 Remote Web Console for Storage System Messages and Error Codes
Error Message
The contents of the e-mail
address information file are
invalid.
A failure occurred while
communicating with the SMTP
server.
Error Message
The field of account or
password is left blank. When
the SMTP authentication is
enabled, your account and
password are required to
input.
The field of sender's e-mail
address is left blank. When
the mail notification service
is enabled, sender's e-mail
address is required to input.
The field of destination e-mail
address is left blank.
When the mail notification
service is enabled,
destination e-mail address is
required to input.
The IP address of the mail
server is invalid. Check the
value if it is set as one of the
following.
IPv4:
The value of each class is
other than 0 to 255.
The value of Class A or all
classes is 0
There is a blanked class.
IPv6:
The value of all segments
is 0. Host :
There is a blanked segment.
Host Name
Blanked
You cannot send a test
message, because the items
to be set are not fixed.
The field of destination e-mail
address is left blank.
Recommended Action
Register the email address
information file again.
Check the state of
communication with the SMTP
server to solve this problem.
Recommended Action
Enter your account or
password.
Enter the sender's email
address.
Enter a destination email
address.
Enter the IP address or the
host name.
Enter the items to be set, and
then retry again.
Enter a destination email
address.
Severity Failure
Level Level
E 5
E 5
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5